EG JDM climate control
#1
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Cali/Newport News
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
EG JDM climate control
Is this plug and play even if the AUTO part is not working that is fine as long I can control my ac and the rest of the switches. If not I can just swap the face plate for it but last night when I tried removing the USDM climate control the light is not working now but the rest still works, I might try to buy a new bulb and if this doesnt work I have no choice just to use the JDM climate control.
Last edited by elmer20; 07-05-2007 at 03:31 AM.
#3
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Cali/Newport News
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Re: EG JDM climate control
Well the problem is my USDM climate control suddenly wont light up after I removed the face plate, never removed the plug I just pulled it out a little so I can remove the face and change the bulb. I already have the JDM cc but dont know if it will work.
#4
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Cali/Newport News
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Re: EG JDM climate control
I just did a test on the sockets and it has power, problem should be the bulb.
UPDATE
Put in the new bulb but still doesnt work, Checked the negative side in the sockets and no power. So the wires are still plug and there is power going to the positive side of the bulb socket but no power on the negative side, PLEASE HELP!
UPDATE
Put in the new bulb but still doesnt work, Checked the negative side in the sockets and no power. So the wires are still plug and there is power going to the positive side of the bulb socket but no power on the negative side, PLEASE HELP!
Last edited by elmer20; 07-05-2007 at 09:00 AM.
#6
GGR son
Join Date: Feb 2005
Location: Portsmouth/Danville
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post