Do I need E-Manage for low boost B16....
#1
Registered Member
Thread Starter
Join Date: Aug 2004
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
Do I need E-Manage for low boost B16....
What changes do I need to make for the following?
Plan on running only 6psi boost. since I have high compression.
Installing Rev Hard Stage 2 turbo kit on B16a?
Right now I have walboro high volume fuel pump.
What other changes should be done?
Thanks
Plan on running only 6psi boost. since I have high compression.
Installing Rev Hard Stage 2 turbo kit on B16a?
Right now I have walboro high volume fuel pump.
What other changes should be done?
Thanks
#3
Registered Member
Thread Starter
Join Date: Aug 2004
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do I need E-Manage for low boost B16....
Originally Posted by Keepin it Klean
Get either hondata or Apexi SAFC fuel computer.
Hondata > all tho
Hondata > all tho
#4
Registered Member
Join Date: Nov 2002
Location: San Diego, CA
Posts: 6,278
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do I need E-Manage for low boost B16....
profec e is the control unit. and emanage is better then the safc (and near the same price new) but if it's for a honda, get a hondata. I think you can even control timing curves.
#5
Registered Member
Thread Starter
Join Date: Aug 2004
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do I need E-Manage for low boost B16....
Originally Posted by IC x Prince
profec e is the control unit. and emanage is better then the safc (and near the same price new) but if it's for a honda, get a hondata. I think you can even control timing curves.
I have a laptop, can I use that to program settings?
#6
Registered Member
Join Date: Aug 2003
Location: cheaspeake
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do I need E-Manage for low boost B16....
uberdata(free)>hondata>safc>fmu
the only bad thing is that you would have to convert to obd-1 to run the uberdata.
but what i am planning is running a stage 2b hondata with you can get for 475 on honda-tech new.
the only bad thing is that you would have to convert to obd-1 to run the uberdata.
but what i am planning is running a stage 2b hondata with you can get for 475 on honda-tech new.
#7
Registered Member
Join Date: Aug 2003
Location: cheaspeake
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do I need E-Manage for low boost B16....
also you will want to put it on a dyno and tune it if you have experience tuning but if you dont just pay someone to tune it for you
#8
Re: Do I need E-Manage for low boost B16....
Originally Posted by 88CRXHFBSTNG
What about Greddy Profec E-01? will that work as well?
#9
Registered Member
Join Date: Nov 2002
Location: San Diego, CA
Posts: 6,278
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do I need E-Manage for low boost B16....
Originally Posted by Keepin it Klean
you wouldnt need an profec e-01, if you got something greddy itd be the e-manage, which is about $310, but most people would recommend the hondata,it has capabilities to control almost everything with your motor, and can be tuned so the car runs like a stock turbo'd car
yeah exactly. i wish there was a nissdata which i heard rumors of some floating around. but I'm not holding my breath. if you want some good shit, AEM ems. that's what i'm shoooting for since my boss works there, i'm trying to get one and support them. or maybe they can support me (which i am holding my breath for since we know them all) but the price difference is outrageous. the hondata will do you just fine...plus some.