Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

D16Y7 starting problems

Thread Tools
 
Old 12-21-2005, 02:48 PM
  #1  
Registered User
Thread Starter
 
chindog69's Avatar
 
Join Date: Mar 2005
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
chindog69 has disabled reputation
Default D16Y7 starting problems

I recently broke down at a gas station. What I did was I hooked up my new amplifier to my subwoofers (orginal wiring from before, nothing new) and i did not have a fuse in my in line power wire. so i drove up to the gas station, turned off my car, went inside and bought a fuse. went to my car, popped the hood, and put the fuse in. when i put the fuse in, it made a spark. everything works inside of my car but wont start. what does that sound like? sounds to me like the ignition coil or the whole distributor. the motor only has about 45,000 miles on it. what can i do.....need help please!!!!!!!!
chindog69 is offline  
Old 12-21-2005, 03:31 PM
  #2  
registeredbeerdrinkr
 
mini-meturbodx's Avatar
 
Join Date: Nov 2002
Location: Beaufort, SC
Posts: 172
Likes: 0
Received 0 Likes on 0 Posts
mini-meturbodx is an unknown quantity at this point
Default Re: D16Y7 starting problems

ignition coil fuse?
fuel injector fuse?
mini-meturbodx is offline  
Old 12-21-2005, 06:47 PM
  #3  
Dont guess, diagnose
 
連続注入's Avatar
 
Join Date: Mar 2005
Location: On the beach.
Posts: 1,470
Likes: 0
Received 0 Likes on 0 Posts
連続注入 連続注入 連続注入 連続注入 連続注入 連続注入 連続注入 連続注入 連続注入 連続注入 連続注入
Default Re: D16Y7 starting problems

First thing to do is check all other fuses. Sounds like you may have blow a different fuse down the line somewhere.

Or the fuse you put in is the incorrext rated fuse.
連続注入 is offline  
Old 12-22-2005, 05:35 AM
  #4  
Iridium V
 
MGBRaceman's Avatar
 
Join Date: Nov 2002
Location: Newport News, VA
Posts: 310
Likes: 0
Received 0 Likes on 0 Posts
MGBRaceman has a reputation beyond reputeMGBRaceman has a reputation beyond reputeMGBRaceman has a reputation beyond reputeMGBRaceman has a reputation beyond reputeMGBRaceman has a reputation beyond reputeMGBRaceman has a reputation beyond reputeMGBRaceman has a reputation beyond reputeMGBRaceman has a reputation beyond reputeMGBRaceman has a reputation beyond reputeMGBRaceman has a reputation beyond reputeMGBRaceman has a reputation beyond repute
Default Re: D16Y7 starting problems

Well it is possible that you could be using the incorrect rated fuse, this would be a great solution. however, if a component is shorted in the circuit, it will have no voltage drop causing more power to pass through the fuse. Sounds like a short.
MGBRaceman is offline  
Old 12-22-2005, 07:43 AM
  #5  
Registered User
Thread Starter
 
chindog69's Avatar
 
Join Date: Mar 2005
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
chindog69 has disabled reputation
Default Re: D16Y7 starting problems

where is the ignition coil fuse at? i checked the fuse box under the hood, i cant tell if the big 50A fuses are blown or not because they are the big squared ones.
chindog69 is offline  
Old 12-23-2005, 07:59 PM
  #6  
Registered User
Thread Starter
 
chindog69's Avatar
 
Join Date: Mar 2005
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
chindog69 has disabled reputation
Default Re: D16Y7 starting problems

Ok, i have found and fixed the problem, i replaced my ignition coil and rotor button now she runs great. thx guys.
chindog69 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
slewis79
Tech Talk
2
04-22-2008 09:10 PM
M1KeyC
Tech Talk
1
11-03-2007 01:07 AM
RtryPwr
Tech Talk
3
01-02-2007 06:57 AM
Ej8D16y8-T
Tech Talk
0
12-06-2005 01:02 PM
beanslimm
Tech Talk
2
10-28-2005 12:48 PM



Quick Reply: D16Y7 starting problems



All times are GMT -8. The time now is 08:54 AM.