crxgsr2004

ok well i did everything yall said and still acting up ..
when the car is sitting still and you hold the gas down just a little bit it rev up and down .. when you drive it when you barely hold the gas down it jerks and bucks . but when you get on it it works fine ..... checked the ecu and its throwing a code 14aand20 but its not throwing them with a long flash and four short blinks its blinking 14 shorts blinks i changed the ecu and the same problem ??? i also change the ivac still throwing that code and the 20 what is the 20 all about ??/

thanks jake

DOHC crx VTEC

So what exactly is your problem? Glass, bucking or what? If you have an Metal Intake, Chance's are it is grounding out on the battery, causing your car to buck. Has happened to me several times. Try putting insul wraping around it, or atleast a rag.

crxgsr2004

the bucking i dont have a intake but i did just relocate my bat ?/

DOHC crx VTEC

Sounds like you have a loose ground somewhere bro.

MerF

So your glass bucks when you first try to accelerate, but it's ok when you are moving.

Try again, this time have an adult type the post for you.

crxgsr2004

ok jack@ss the car bucks when i barely touch the gas..

crxgsr2004

but when i get into hard it stops bucking and acts great

Slimsta Jimsta

motor mounts? i'm lost as to what you're saying...

what glass are you talking about?

MerF

A general rule of thumb for troubleshooting is that if a problem appears after making a change in something, that problem is directly related to the change.

So I'd find "the guy" and ask what exactly he adjusted, and go from there.

crxgsr2004

well i adjusted it and same thing is it true that if my battery was grounding out it would do this because i just relocated it in the rear ..

thanks.. the glass has nothing to do with the problem im just upset im have issues with it runnig it was broke into and i just got the glass replace and i want to go out and i had problems so sorry if i sounded like a retard..