cable to hydro conversion help
09-28-2008, 12:36 PM
#1
Registered Member
Thread Starter
Join Date: Apr 2008
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
hydro to cable conversion help
got a 91 integra wana put a gsr tranny in
dont get what i have to do
i know i need the conversion kit for it
but what are the steps for installing
how to do it
please skool me
dont get what i have to do
i know i need the conversion kit for it
but what are the steps for installing
how to do it
please skool me
Last edited by BlacktopDET; 09-28-2008 at 03:19 PM.
09-28-2008, 02:04 PM
#3
Registered Member
Thread Starter
Join Date: Apr 2008
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Re: cable to hydro conversion help
once i buy the kit is that all that i need
http://cgi.ebay.com/ebaymotors/_Car-...=p4506.c0.m245
where does it all bolt too
can i convert it while i have the tranny on the floor?
http://cgi.ebay.com/ebaymotors/_Car-...=p4506.c0.m245
where does it all bolt too
can i convert it while i have the tranny on the floor?
09-29-2008, 09:00 AM
#5
fabricating is fun
Join Date: May 2007
Location: H-town
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: cable to hydro conversion help
this is for d series but it should be about the same.
http://www.hondatuningmagazine.com/t...wap/index.html
http://www.hondatuningmagazine.com/t...wap/index.html
Thread
Thread Starter
Forum
Replies
Last Post
