building a motor..need help
#1
Registered Member
Thread Starter
Join Date: Jan 2009
Location: Stafford
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
building a motor..need help
i have a d15b7 and i want to put in d16a1 pistons??? and mate the block with a z6 head.....
MOST IMPORTANT...WHERE CAN I FIND OUT THTE COMPRESSION AND ESTIMATED HP/TRQ FOR THIS SET UP....
i just need to know if i have to use the rods and all or the just the pistons from the d16a1....
i have the complet d16a1 swap so that will not be a problem.
ANY HELP WOULD BE GREAT..THANKS IN ADVANCE!!!!
MOST IMPORTANT...WHERE CAN I FIND OUT THTE COMPRESSION AND ESTIMATED HP/TRQ FOR THIS SET UP....
i just need to know if i have to use the rods and all or the just the pistons from the d16a1....
i have the complet d16a1 swap so that will not be a problem.
ANY HELP WOULD BE GREAT..THANKS IN ADVANCE!!!!
#5
Registered Member
Thread Starter
Join Date: Jan 2009
Location: Stafford
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Re: building a motor..need help
yeah w/e and thanks....ill look into it....i know the head and block are a mini me and know how to do one but the piston swap is the only thing i dont know about thanks guys.....im still google-ing...foundsome stuff not too much help yet
Last edited by 1beatupteggy; 05-26-2009 at 11:57 AM.
#6
Registered Member
Join Date: Apr 2003
Location: Richmond VA
Posts: 2,569
Likes: 0
Received 0 Likes
on
0 Posts
Re: building a motor..need help
i have a d15b7 and i want to put in d16a1 pistons??? and mate the block with a z6 head.....
MOST IMPORTANT...WHERE CAN I FIND OUT THTE COMPRESSION AND ESTIMATED HP/TRQ FOR THIS SET UP....
i just need to know if i have to use the rods and all or the just the pistons from the d16a1....
i have the complet d16a1 swap so that will not be a problem.
ANY HELP WOULD BE GREAT..THANKS IN ADVANCE!!!!
MOST IMPORTANT...WHERE CAN I FIND OUT THTE COMPRESSION AND ESTIMATED HP/TRQ FOR THIS SET UP....
i just need to know if i have to use the rods and all or the just the pistons from the d16a1....
i have the complet d16a1 swap so that will not be a problem.
ANY HELP WOULD BE GREAT..THANKS IN ADVANCE!!!!
Thread
Thread Starter
Forum
Replies
Last Post
qualityauto
Sponsor Marketplace
66
02-13-2009 09:37 AM