bmxerforlife58

ok i have an obd 1 gsr built if completly cold will start up and run great and after a moment or 2 it will choke itself out then wont start again for a while. after waiting and it starting again will do the same thing. after it stalls it will act like it wants to start but it wont.. what could cause this??only code im throwing is air intake temp.

gsr block borred to match 81.5 pistons head has blox valvetrain pro 2 cams blox intake mani blox 70mm throttle body stock injectors any ideas??

onesick97ek

get it tuned! that will slove all the problems trust me i had a similiar prob with my built b16. with it cutting off all the time and if the cams are TDC they should be degreed to the specs to get the most out of the cam.


give me good rep if this helps any

Richmond

Bro, where did you find a brand new gsr? I need to get some of those!

bmxerforlife58

brand new meaning everything is new and the cams are degreed to cam specs it just runs good when its on then just nothing will get a tune soon as i can just thought it would at least run

Fabrik8

Fix the intake air temp sensor fault, and then get it tuned. The intake manifold, cams, and throttle body are going to be pretty far off of the stock tune.

You already know you have a sensor fault which needs to be fixed, and you already know you've modified multiple things that affect intake flow velocity. So you already know something needs to be fixed and you already know that tuning is required.

bmxerforlife58

Yea just wanted to make Shure that tune is only thing holding me back I apreciate everyone's help. Hoping tune fixes it

onesick97ek

if your also looking for a great place to tune. Adrenaline Auto in richmond va does a amazing job they tuned my b16 for me and did a great job. heres there number : 804 525 6738

bmxerforlife58

Thanks bud