best stuff for molding bodykit
what do you guys use to mold your bodykits?
|
Re: best stuff for molding bodykit
fiberglass...
|
Re: best stuff for molding bodykit
some stuff called fuze or something, go to a body shop a (good one) and ask thats your best bet...good luck
|
Re: best stuff for molding bodykit
I think your talking about Fusor. It's an adhesive, and will bond the kit to the car, but you may want to blend the kit to the car with fiberglass or something if you want it really smoothly molded. Urethane kits are kinda hard to mold because most resins used with fiberglass won't stick to it very well. Fiberglass kits are easy though. Lotta work though, lots of sanding and feathering with body filler. Depending on what type of resin you're using, you probably want to strip down to bare metal and then rough the metal up pretty good. You want to have the best possible adhesion, because the fiberglass will be more flexible than the steel, so you're fighting both peel and shear modes. Clean and degrease the sheet metal and the body kit, this is important also..
|
Re: best stuff for molding bodykit
we use fuzor at dreamworks .great results,the catch is that after fuzing the kit on and sanding the fuzor you have to 1st prime it with a 2 part urethane primer.you then sand the primer with 80 grit without busting thru,now youre ready for bodywork.
|
Re: best stuff for molding bodykit
we use fiberglass strands and wet them with fiberglass resin. then sand it then a light coat of bondo cause fiberglass tend to have ptis in it after you sand it.
|
Re: best stuff for molding bodykit
we use fusor too over here at nushine paint and body, as well. great results, but we do prefer using norton speedgrip. Its more stronger and has more structure.
757-641-6561 |
Re: best stuff for molding bodykit
we usually make brackets to mount the kit to the car, then use tiger hair(fiberglass strands in a fiberglass resin) and light weight body filler over top for the perfect flat finish....then lots of urethane primer.....
|
Re: best stuff for molding bodykit
Originally Posted by japns14
some stuff called fuze or something, go to a body shop a (good one) and ask thats your best bet...good luck
|
All times are GMT -8. The time now is 12:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands