b18b swap into my 95 civic
#1
b18b swap into my 95 civic distributer problem
I am swapping b18b non vtec into my 95 civic the distributer on the b18b has 1 plug and the 1 on the old distributer had 2 plugs what is needed to convert the b18b to a 2 plug i do have the ecu for the b18b.Also need to know what rear motor mount i need the one that came with with ls motor was not long enough.
Last edited by fiveomike; 12-05-2009 at 02:15 PM.
#2
Re: b18b swap into my 95 civic
Sounds like the b18b1 came out of a obd2 car. Simply depin the ls dizzy and put the d series plugs on it. may have to cut and solder the two wires for the coil. (blue and the black and white one)
#3
Re: b18b swap into my 95 civic
Do not depin the plugs. You have two other options that will work better. One is the easiest, but there is a cost. Rywire and a few other places sell a conversion plug that will adapt the OBD2 (LS) distributor to the Civic engine harness.
Option 2: With out cutting or spending any cash you can take the guts from the SOHC Distributor and put it into the LS distributor case. All of the internal parts are the same. The only issue is that the screws are a pain to get out and may strip.
Option 2: With out cutting or spending any cash you can take the guts from the SOHC Distributor and put it into the LS distributor case. All of the internal parts are the same. The only issue is that the screws are a pain to get out and may strip.
#6
Its Lightish Red
Join Date: Oct 2005
Location: Jacksonville, FL
Posts: 2,755
Likes: 0
Received 0 Likes
on
0 Posts
#7
Re: b18b swap into my 95 civic
Bumping cause i got no answer bout my rear motor mount so next time read the thread and look a see if i got all the answers to the ?'s that i asked!!! Thank U!!
#8
Re: b18b swap into my 95 civic
My bad. Not sure if you just added the question about the mount or not or I just missed that skimming your post.
Like said above you need one off of a 94-01 Integra as well as the front lower trans mount (in front of the radiator) If you got the complete swap you should have got those mounts with it. If you are trying to retain A/C you will need the front lower engine mount/ A/C bracket from a Del Sol with the DOHC engine.
PM me if you need any other pointers.
Like said above you need one off of a 94-01 Integra as well as the front lower trans mount (in front of the radiator) If you got the complete swap you should have got those mounts with it. If you are trying to retain A/C you will need the front lower engine mount/ A/C bracket from a Del Sol with the DOHC engine.
PM me if you need any other pointers.
#9
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18b swap into my 95 civic
Closed per request.
Thread
Thread Starter
Forum
Replies
Last Post