B18 swap to 98 EK
#1
Registered Member
Thread Starter
Join Date: Aug 2011
Location: New Kent
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
B18 swap to 98 EK
Don't comment bullshit. but i need help. Im swapping out my D16 for a B18 B1.
I need to know what i need to do/get.
I already have the rear T bracket. what else?
I need to know what i need to do/get.
I already have the rear T bracket. what else?
#3
Re: B18 swap to 98 EK
bseries mount (99-00 si mounts will work), 94-01 integra shift linkage or 99-00 si shift linkage, 99-00 si rear t bracket, 94-01 integra axles and half shaft or 99-00 si will work. 96-98 ex harness.
#4
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: B18 swap to 98 EK
People have been doing this swap since 1992 (a B18 in a D16 Civic), so theoretically there should be 20 years of information about it floating around the internet somewhere...
Hmmmm.
Hmmmm.
#5
Registered Member
Thread Starter
Join Date: Aug 2011
Location: New Kent
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Re: B18 swap to 98 EK
thanks. I have the whole car. so i have the 01 shift linkage, have the 01 axles and half shafts.
#6
Re: B18 swap to 98 EK
+1 also if its vtec car a b18 ecu. I'm guessing when you say b18 your meaning ls not gsr or itr. And you will most likely need to just get a obd2 to obd1 jumper harness for ecu if you want to run the right ecu to help with codes.
#7
Registered Member
Thread Starter
Join Date: Aug 2011
Location: New Kent
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Re: B18 swap to 98 EK
yeah its LS. my car is D16Y8 none vtec. anything from either car i will have. its etc. parts i need.
#10
Re: B18 swap to 98 EK