jlgrtype

I got a 94 civic 4 door with a d15 auto. im in the middle of the swap to a jdm b16 manual and i have ran into a problem, the rear mount does not line up. I thought that this swap should fit without problems because it comes from a 92 to 95 sir jdm civic. is there a rear engine mount that would fit and fix this problem. I apreciate your help.

thermal

you need to find a B16 delSol rear mount. Otherwise, get you a mount from Innovative or HAsport.... there are other ones that would fit.. I cant remember exactly tho...

TurboHonda

any 94-01 integra rear mount will work its also called the T bracket

jlgrtype

thanks. ill get one from the integra first then if not ill get the delsol. ps on the delsol you mean b series right?

92dx757

are you using an auto to manual conversion mount for the trans?

idriveahonda

Auto and Manual rear and transmission mounts are different.

jlgrtype

i just figured that out. i need a upper transmission mount to convert from the auto to manual beause the body frame mount sits higher than the manual. any ideas were to get such mount. all the others fit right. just that one is the bitch. the T mount was not the problem thanks amyways for the info.

92dx757

http://www.honda-tech.com/zerothread...ostid=30998124

jlgrtype

thanks, you guys are life savers. everithing should be up and runing by wed. ill order the conversion mount tomorrow and take it for a spin before i give the car to my brother.