180sx2fast4u

I just swapped a jdm B16 into my 90 integra. Motor went in great and started up fine. When i went to pull it out of my garage I noticed i couldnt get the car in first gear. After inspection i realized that the shifter is tilted toward the driver side and the console is stopping the shifter from going into first and second. I checked the linkage and everything looks to connected properly. Did i do something wrong or is there something I dont know. If anyone has had this problem or knows the solution let me know. Thanks

straightHYPE

did you use the same tranny and shift linkage?

180sx2fast4u

Same linkage, different trans

straightHYPE

what trans are you using ?and is it cable or hydraulic

180sx2fast4u

Cable, whatever came on the jdm b16

straightHYPE

the tranny shifts fine out does it give u problems in any other gear

180sx2fast4u

If the center console was out I could get to all gears, right now third is in firsts place and 5th is in 3rds

straightHYPE

wow um i guess take the shift linkage out check it if anything it could be the tranny internal shifter is bent

180sx2fast4u

Yeah I'm gonna check it saturday, ill let u know the outcome

DeFunk

Does the gear shift feel more loose than you are used to, does it wiggle side to side when in gear?