B16 head tapped for Ls Vtec
#1
Registered member
Thread Starter
Join Date: Jul 2009
Location: va
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
B16 head tapped for Ls Vtec
i just bought a B16 head and i didnt realized that it was tapped for Ls Vtec, im trying to use it on a Gsr block, would i be able to do that or would i have to undo the tapping?? Is that possible?? some help please
#3
Registered Member
Join Date: Jul 2009
Location: Culpeper
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16 head tapped for Ls Vtec
what do you mean tapped for ls/vtec i know how to build a ls/vtec < in the process are you talkin about on the bottom of the head where you thread it and use the plug ?
#4
Re: B16 head tapped for Ls Vtec
Remove the plug and run it as is, the threads arent gonna hurt a thing
Also make sure you put the plug back in the head if it was removed for the oil feed line
Also make sure you put the plug back in the head if it was removed for the oil feed line
Last edited by RankZ-28; 12-16-2009 at 10:29 AM.
#5
Re: B16 head tapped for Ls Vtec
If you remove the plug from the bottom of the head and then put a plug in the side of the head where the -an line should have been at.
Just do it in reverse...
Just do it in reverse...
#6
Registered member
Thread Starter
Join Date: Jul 2009
Location: va
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered member
Thread Starter
Join Date: Jul 2009
Location: va
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
mikejones002100
Engine / Exhaust / Drivetrain
19
05-08-2009 03:58 PM