b16 in a ek........not reading rpms
 

need help, just swaped a obd2 si into a ek hatch. used the obd2 motor harness and obd2 ecu, not getting any rev reading. checked plugs and grounds.
any help is help

thanks

Re: b16 in a ek........not reading rpms
 

have you checked your VSS?

Re: b16 in a ek........not reading rpms
 

yes swaped out with a good one, and still nothing, i know the vss i tryed was good bc it works in my car

Re: b16 in a ek........not reading rpms
 

What year hatch did it go into?

Re: b16 in a ek........not reading rpms
 

96 hatch, dx model

Re: b16 in a ek........not reading rpms
 

what ecu are you using? check for continuity from vss to pinout at ecu.

Re: b16 in a ek........not reading rpms
 

its a p2p i think :/ cant remember off the top of my head, and i'll do.

Re: b16 in a ek........not reading rpms
 

When you say OBD2 wiring harness do you mean the stock harness or the one from the si? What distributor are you using?

Re: b16 in a ek........not reading rpms
 

if you have the 99 si b16, the ecu should be a P2T. the P2P is from the ex. also check out http://hondaswap.com/

Re: b16 in a ek........not reading rpms
 

figured it out. the si wire harness only has two plugs for the ecu, switched to a obd2 ex harness(3 plugs) and problem solved.