B16 CRX Guys HELP!
04-04-2005, 12:47 PM
#1
RIP MEAST
Thread Starter
Join Date: Nov 2002
Location: SouthCentral VB
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
B16 CRX Guys HELP!
Alright, i need to know what the setup you are running for your axles? I dropped my car off at Accuracy, and shad says i need to get different axles. Can i run a 90-93 teg half shaft, and use 90-93 axles? Or do i have to buy aftermarket axles for it? Any help would be appreciated.
04-04-2005, 01:08 PM
#4
Sumospeed #O.G.
Join Date: Apr 2003
Location: Va Beach
Posts: 2,514
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16 CRX Guys HELP!
on what car? if it is an 88-91 civic, take the axle out and on the back side of the spindle, behind the rotor there is a metal ring type of thing. ,You need to pry those out.
04-04-2005, 01:09 PM
#5
RIP MEAST
Thread Starter
Join Date: Nov 2002
Location: SouthCentral VB
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16 CRX Guys HELP!
Originally Posted by SlowLS
on what car? if it is an 88-91 civic, take the axle out and on the back side of the spindle, behind the rotor there is a metal ring type of thing. ,You need to pry those out.
Thread
Thread Starter
Forum
Replies
Last Post
Jason300zxTT
Tech Talk
5
01-28-2004 11:55 AM