JaysDM

I was just wondering whats involved in an Automatic to Manual transmission swap? what parts would I need to do this and is it not something that can be done when purchasing a new motor+transmission for a swap? does anyone know, if so thanks for the Info....

NIC668

Need more info on what car you are planing on doing this to. If you are planing on do a swap or a front cut that way you have most of the parts there already.

M1KeyC

Im doing the auto to manual conversion in my 240, so far I need the slave Cylinder Master Cylinder, drive shaft, clutch petal... and all of the connecting hoses to the new tranny... might be more too

MattnTheHATch

i wanna do the same thing to a 92 integra ls, what do i need?

PoS hYbRiD

You need me to do it , Just finished a 95 JDM H22 Manual into a 97 Accord EX AUTO. Its was fun(pain in my ass) but its running strong with no cel on a obd1 p13.

scorched

A manual donar car.

You're probably going to need the ECU, Tranny, Clutch and Flywheel Pedal/Cable Assembly, etc.

PoS hYbRiD

a donar car is nice , but rare , its easy , i got half the parts here Matt.

00civichatch

~~~~yall forgot the shift linkage for the ls 'teg

Fabrik8

PM me if you're serious about the swap, I can convert a lot of auto ECUs to manual, it could save you from having to buy one..