96 civic dx with b18c
06-18-2011, 09:36 AM
#1
Registered Member
Thread Starter
Join Date: Aug 2009
Location: Louisa
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
96 civic dx with b18c
i have done everything that i was sopposed to i have a 96 civic ex motor harness, changed the icv valve from a 3 prong to 2 prong and switched them at the harness... have a jumper harness and a p28 chipped to p72 basemap... i am having problems with the car it will not come out of limp mode... if you know what might be wrong with it please help.. i have had a few differnt ppl look at it and they do not have any idea what might be wrong with it... and i will even offer if you can get it running i will pay you
06-23-2011, 05:23 AM
#7
Registered member
Join Date: Jun 2007
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Re: 96 civic dx with b18c
If you are getting a code 10 that is your IAT do you have that hooked up? Have you tried another computer? Are the plug wires in the right order? Check the timing.
Thread
Thread Starter
Forum
Replies
Last Post