VADriven.com Forums

VADriven.com Forums (https://www.vadriven.com/forums/)
-   Tech Talk (https://www.vadriven.com/forums/tech-talk-9/)
-   -   93 Dodge RamCharger (d150) Steering Shaft Install (https://www.vadriven.com/forums/tech-talk-9/93-dodge-ramcharger-d150-steering-shaft-install-490940/)

keefboz 04-12-2016 05:31 PM

93 Dodge RamCharger (d150) Steering Shaft Install
 
Anybody got experience with this kind of install? How hard it is etc.?

Looking to do it this weekend on this bad boy I just picked up.

http://i88.photobucket.com/albums/k1...pssz55po5q.jpg

NasTHatch 04-12-2016 06:32 PM

Re: 93 Dodge RamCharger (d150) Steering Shaft Install
 
My buddy does side work if you don't mind paying a little to get it done

keefboz 04-13-2016 06:28 PM

Re: 93 Dodge RamCharger (d150) Steering Shaft Install
 

Originally Posted by NasTHatch (Post 8370958)
My buddy does side work if you don't mind paying a little to get it done

Thanks for the reply buddy, I actually found a write up and it is easy as piss apparently. Is he particularly good on older trucks?

NasTHatch 04-13-2016 07:23 PM

Re: 93 Dodge RamCharger (d150) Steering Shaft Install
 

Originally Posted by keefboz (Post 8370969)
Thanks for the reply buddy, I actually found a write up and it is easy as piss apparently. Is he particularly good on older trucks?

Yeah man

Dough_Boy. 04-14-2016 05:21 AM

Re: 93 Dodge RamCharger (d150) Steering Shaft Install
 

Originally Posted by keefboz (Post 8370969)
Thanks for the reply buddy, I actually found a write up and it is easy as piss apparently. Is he particularly good on older trucks?

Should be able to tackle it pretty easily. Not like newer cars with all the wiring shit. Only calls for and hour in my work computer. But should only be like three or four bolts and pull it out. Then unhooking the wiring harness to it.

keefboz 04-14-2016 04:20 PM

Re: 93 Dodge RamCharger (d150) Steering Shaft Install
 

Originally Posted by Dough_Boy. (Post 8370976)
Should be able to tackle it pretty easily. Not like newer cars with all the wiring shit. Only calls for and hour in my work computer. But should only be like three or four bolts and pull it out. Then unhooking the wiring harness to it.

Yeh, thats what the write up says, thank you!

keefboz 04-18-2016 05:31 PM

Re: 93 Dodge RamCharger (d150) Steering Shaft Install
 
Shit was a pain in the ass to remove, but easy as pie to put on the new one. Driving so much better now.


All times are GMT -8. The time now is 01:58 PM.


© 2024 MH Sub I, LLC dba Internet Brands