90-93 ls swap
03-03-2003, 03:52 PM
#1
Registered User
Thread Starter
Join Date: Dec 2002
Location: Newport News
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
90-93 ls swap
what do i need to get to put a 90-93 teg B18 in a 89 crx hf ?????
i can get the whole swap for 900.00(whole swap meaning: motor,tranny,harness,ecu,axles,linkage,and stock motor mounts). what do i need? will the stock mounts work or do i need to get hasport?
i can get the whole swap for 900.00(whole swap meaning: motor,tranny,harness,ecu,axles,linkage,and stock motor mounts). what do i need? will the stock mounts work or do i need to get hasport?
03-03-2003, 05:18 PM
#3
teamULTRASPEED
Join Date: Nov 2002
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
use the tranny, if the motor is 90-91 you can use the engine harness/ecu/distributor. If it's a 92-93 you'll have to buy a 90-91 engine harness/ecu/distributor, or buy a obd0-1 conversion harness. Use the LS axles. Need to cut the shift linkage. And have to buy aftermarket mounts.
Thread
Thread Starter
Forum
Replies
Last Post
sTohc4door
Engine / Exhaust / Drivetrain
0
02-18-2009 05:23 PM
dfoxengr
Parts ARCHIVE
3
01-31-2008 07:42 AM
jdmontheway
Parts ARCHIVE
0
09-16-2007 10:40 PM