97gsrJDMteg

Will these stick out? Will they look flat, like flush with the vegicle or will they look like this pic?


This pic the owner claims it an offset of +20

http://www5.picturepush.com/photo/a/...mg/1026768.jpg

Lord Humongous

On what?

I swear to god, most of you fucking idiots think the internet is a fucking magical place where asking a question with no information will net you a right answer

OhShift!

^This.

But, as a guess from your signature. They will be flat, as in not concave, but they will not be flush with the vehicle. They will be sunken.

ShawnD

they'll probably look the exact same as in the picture imo

freshEK4

The wheels in the pic are offroad grids if u have the regular grids they r goin to sit flat offroad grids are concaved so check which ones your gettin 1st I have offroad grids with a + 10 offset and I had to camber my rears

Fabrik8

Okay, for the 100th time on this forum... You cannot tell anything about wheel fitment from the offset alone. You need offset and wheel width. Offset is just the distance from the wheel centerline to the mounting face of the wheel, so that doesn't say anything important without knowing what the wheel width is.
If you have a +40 offset wheel that is 6" wide, it will be completely different than a +40 offset 8" wide.

So what's the wheel width?

If you stand in the middle of a room, and I tell you to take a step to your left, will you run into the wall? There's no way to tell unless you know how big the room is, correct? All you know is that you're a step left from center, that's it.

Lord Humongous

Yes.

Because I'm Lord Humongous

Sun Wukong

Yeah when Lord H. is in the center of the room he touches all four walls.

Lord Humongous

With 5 points of contact

Fabrik8

This is turning very Chuck Norris joke all of a sudden. LOL..