Notices
Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

2007 outback manual trans slipping

Thread Tools
 
Old 02-05-2012, 12:58 PM
  #1  
Registered Member
Thread Starter
 
masterrick6's Avatar
 
Join Date: Feb 2012
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
masterrick6 has disabled reputation
Default 2007 outback manual trans slipping

I have a 2007 subaru outcack.when you drive it the rpm will go up but the car will not move.have put two subaru clutches in.replaced the center diff.It works for about three days and does the same thing.If there is any ideas about this please let me no.Thanks Rick
masterrick6 is offline  
Old 02-05-2012, 03:25 PM
  #2  
Racetracks
 
Fabrik8's Avatar
 
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes on 0 Posts
Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8 Fabrik8
Default Re: 2007 outback manual trans slipping

Check the throwout assembly on the clutch. Is possible that its not allowing the clutch to engage properly. If you replaced the flywheel at the same time, there might be a step problem with the friction surface. Or, you might have a transmission problem. I'm thinking its not a trans problem because that's not something that works for a few days and stops.

Last edited by Fabrik8; 02-05-2012 at 03:28 PM.
Fabrik8 is offline  




All times are GMT -8. The time now is 07:10 AM.