Alkaline8214

Just put a new dash in my car and now I have the cruise control button. I want to use this as a switch for my fog lights. My fog lights consist of a hot wire running from fuse box, a white(neutral wire). I just need to know what wires on the cruise control plug are the hot, neutral, and the ground. I get the cruise control light to come on but no luck with the fogs. Thanks in advance

NasTHatch

why not use cruise control for cruise control and just get a fog light switch?

Fabrik8

Why not find a factory service manual to get the switch pinout and then figure out the very simple wiring to put a relay on the fog lights?

NasTHatch

or this....

Fabrik8

Or, you Google "integra cruise control fog lights"

and the first result from Google is:

http://www.team-integra.net/forum/di...0&ThreadPage=1

NasTHatch

man some people just make things so damn hard.

Alkaline8214

just asking what the wires of each one were for. I do want to do my cheap ass fog lights, but had some other ideas in mind. Many of the tutorials using google have a jdm foglight and not some cheap ass one like I got. . I figured I would ask here and not go FIND a service manual cause I was not in a rush about it at the moment. One of my friends did send me a diagram though. Thanks guys.

uhhhh... dont have cruise control lol.

couped

then whats the point of this shit.. use a switch
if u wanna be complicated then i wouldnt expect the finished product to be nothing short of a disaster

Alkaline8214

technically the cruise control button... is a switch... I got the info I needed bro, I stated that in my previous post. No need to add unnecessary comments. Thanks again

Fabrik8

Doesn't matter, it's exactly the same regardless of what type of fog lights they are. Switch turns on relay, and relay turns on fog lights.

The reason a factory manual (just the schematics really) is useful is that you can see what things actually do, instead of some tutorial that says "hook the yellow wire to the blue wire, and hook the white wire to the green and black wire".

And for what it's worth, the picture on the first page of that tutorial I linked to is the only thing you actually need. Those are generic Bosch automotive relay pin designations, that's not a Honda factory relay.