grgazn

Well, I know how to remove motors, I have a hoist/cherry picker, jackstands and many tools/wrenches/sockets etc, but I need a little help on how exactly to remove the motor. I'm assuming it's just a matter of pullin off all accessories, but what else do i need to do to make this go the quickest?

Thanks in advance!

I Love (.)(.)

un-bolt all accessories, and unbolt trans, and flywheel bolts. then motor mounts, and take it out....

grgazn

ok, so don't drop motor/tranny together? i don't do much with domestics....

I Love (.)(.)

you can, just make sure everything is disconnected from the tranny, like linkages and lines etc etc, and remove the crossmember, should come right out

BAN HAMMER

Drain all the fluid. You don't even have to remove accessories.

Remove hood
unbolt and remove driveshaft
drain fluids
dissconnect shift linkage
dissconnect all electrical plugs from wiring harness
remove ac lines
dissconnect fuel lines
dissconnect tranny cooler lines
unbolt crossmember
unbolt motor mounts

pull motor

grgazn

ok, thanks guys. i will hopefully get this piece of shit fixed soon

nftuatn

is it a real impala or a clone??

wanna sell it if its real.