Tech Talk Anything technically related to your vehicle should be posted here. If you're looking to have work done, try one of the Regional Forums.

1991 crx si wont start need help please :(

Old 07-07-2014, 09:50 AM
Registered Member
Thread Starter
Join Date: Jul 2014
Posts: 1
CRX1991Si has disabled reputation
Default 1991 crx si wont start need help please :(

just did a motor swap as i bought the car as a shell. i swapped a d15b2 non v tec with skunk 2 im and the stock si mpfi harness. pm6 ecu and kept everything obd0. my started signal fuse doesnt get power so the car wont crank. i ran a "hotwire" to the fuse and it will crank but no start.a few things i have noticed is there are 2 wires on the ecu plugs look cut but there are no extra inlets on the plug itsself? 1 white/yellow and 1 white with silver dots. are these necessary? also under the dash by the clutch there is a white 4 prong plug that i can not find any info or as of where it may plug into.. those wire colors are black/red black/white black/white and a smaller wire which is blue and black.
CRX1991Si is offline  
Old 09-24-2014, 08:47 PM
hatchblack's Avatar
Join Date: Sep 2006
Location: VB
Posts: 2,044
hatchblack has disabled reputation
Default Re: 1991 crx si wont start need help please :(

sounds like you're getting power. probably the problem lies within that ecu harness. monotech has a pretty decent ecu conversion on ebay. i chased my tail for days until i contacted them to send me over a new one and my car started right up.
hatchblack is offline  
Related Topics
Thread Starter
Last Post
Tech Talk
01-11-2010 04:22 AM
Engine / Exhaust / Drivetrain
01-06-2010 02:50 PM
Tech Talk
02-21-2008 05:50 PM
Cycle Corner
10-01-2006 04:24 PM

Quick Reply: 1991 crx si wont start need help please :(

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

  • Ask a Question
    Get answers from community experts
Question Title:
Your question will be posted in: