JDM_Tuning23

I Just bought a set of dr20 15x7 4x100. They go on but the problem im having is the whole for the lugnut is too small and ive tried about 4 diferent types of lugnuts. The wheels originally came off a miata.
My car is a 96 civic hatch

can anyone help me out?

Fobby

you need a different set of lug nuts you need the "tuner" style ones uses a special key for the lugs.

JDM_Tuning23

^^ Ima Look Into It. Is there a Specific Set ?

slotoyo

try a set of these:

jdm monkey

make sure the one you buy has the correct thread pitch,etc.

JDM_Tuning23

^^ Thanks Peoplee. Ima Try It out. Also The Center of the rims dont line up with the center on the hub(where axle nut is) will that make any difference?

phyber

there are several differnt hub sizes that wheels can come in. while most SHOULD be interchangeable, some are not. I'd advise against running them if they're not correctly set on the hub. if you tighten the wheels down, the lugs may be holding, but then wheel is not against the hub. you'll notice wheel vibes at speed...the same thing can be felt on a set of wheel spacers that aren't hub-centric.

dirty c

great advice. i would not use them.

JDM_Tuning23

Let me clearify. its in the center of the hub BUT theres alot more space around.

nftuatn

the lug nuts will hold it just fine...go to pepboys and get some tuner lugs and put them on and ride