0bd1 h22 in a obd2 accord
#1
Registered Member
Thread Starter
Join Date: Jan 2010
Location: lynchburg va
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
0bd1 h22 in a obd2 accord
hey guys i bought a obd1 h22 motor im puttin it in my 96 accord i bought obd2 h22 injectors,ecu an dizzy is there anything else i need to make this motor work
#2
HondaAccordSlpr
Join Date: Sep 2004
Location: Fredericksburg, VA
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: 0bd1 h22 in a obd2 accord
ok you will need a need oil pump and crank angle sensor for starters,.. you have to basically convert up to make your harness work properly. There is alot of great information in a honda society accord forum.
#3
HondaAccordSlpr
Join Date: Sep 2004
Location: Fredericksburg, VA
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: 0bd1 h22 in a obd2 accord
http://www.hondasociety.com/board/ try this website.. also do yourself the favor and do all the PM while the motor is out like water pump, belts, spark plugs and wires, dizzy cap and rotor, valve cover gaskets, Mugen Thermastat and Fan switch.. You will be glad you did..
Last edited by giterdone; 02-22-2011 at 12:05 PM.
#4
Registered Member
Thread Starter
Join Date: Jan 2010
Location: lynchburg va
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Re: 0bd1 h22 in a obd2 accord
yea the motor is still in my kitchen wont put it in till everything is right will the obd2 prelude engine harness hook up to the my accord cause i just got the obd2 dizzy an fuel injectors ecu is comin in i ordered a new water pump an belts so i need a obd2 oil pump an crank sensor
Thread
Thread Starter
Forum
Replies
Last Post