**Eg Hasport Mount Problem**3bolt to 2bolt**
 

I have a lsv n a eg coupe....car had the 3bolt mount bracket/mount on it......
Purchased a set of hasport mounts from a buddy not paying attention they were 2.bolt driver side

Got a 2 bolt bracket off of a b20
Installed it on my car and when i installed the mount
-i.had to pryyyy like a bitch to get the holes lined up for.bolt
-once i got the bolt thru i noticed that side.of my motor was tilted down
slightly
- tried to drive car and my shift linkage was wedged on something umder car from my.motor being.tilted
-installed 3bolt.bracket n stock mount back


ANYONE have a answer on how i can use that 2bolt hasport mount?
Maybe i need a diff 2 bolt bracket or something idk need help asap
Pleaseee Calll or Texttt mee 540-424-9050

Re: **Eg Hasport Mount Problem**3bolt to 2bolt**
 

You need a 2 bolt bracket from any other b series. The b20 bracket is different from the others

Re: **Eg Hasport Mount Problem**3bolt to 2bolt**
 

What b series? i kno all tegs are 3? so del sol b16?

Re: **Eg Hasport Mount Problem**3bolt to 2bolt**
 

I've never worked on a del sol so I can't be 100 percent but that should work.

Re: **Eg Hasport Mount Problem**3bolt to 2bolt**
 

Appreciate it

Re: **Eg Hasport Mount Problem**3bolt to 2bolt**
 

Any b16 one will work. Any non-Integra b-series (including b20).

So 99-00 SI or 93-97 del sol VTEC.

Re: **Eg Hasport Mount Problem**3bolt to 2bolt**
 

Thanks alot ^^^ now i gotta fuckin find one

Re: **Eg Hasport Mount Problem**3bolt to 2bolt**
 

Ebay it man.

Or ask one of the people on here with swaps, to part the driver side motor mount.

Re: **Eg Hasport Mount Problem**3bolt to 2bolt**
 

ive contacted few ppl