ka24e swap s12.(1986 nissan 200sx)
Name: jeff
Location: 23149 or yorktown
Means of contact: this thread, pm me for my number
Price: $2500obo, busted up *running* civic/integra with cash on your end or a pick up truck(reallllllllly want a old datsun) but will look at anything, also interested in a GMC Van
Description:
this car start life as a ca20e notch, i bought the car with a bad motor. i swaped in a ka24e, the motor has a newly ported head with a 3 angle valve job, new OEM nissan gaskets from the head up, new TPS, water pump, coolent temp sensor, tune up, custom intake with aftermarket filter, ebay header with 2in exhaust. has new soild motor mounts. i did a bell houseing swap with new oem nissan gasket and gear oil. the trans shifts great. car has s14 front seats and no rear. lowered on cut stock springs, 5mm front wheel spacers, aftermarket 16in rims, wired up a safc still needs to be tuned. current va state inspec. car does run and drive but needs a new ecu(#11) to go over 75mph. i probly will be replacing soon. also has new rear brake pads,new oem brand new BMW m3 fuel pump. im sure im missing something..
i am in the middle of mock up a m90 supercharger, for another $300 ill throw in everything i have for this.. i will remove it, if needed. i will still be working on this so let me know if there is interested in it all motor
Pictures:






heres with the charger.. if you dont like it then dont post. i really dont care..
Location: 23149 or yorktown
Means of contact: this thread, pm me for my number
Price: $2500obo, busted up *running* civic/integra with cash on your end or a pick up truck(reallllllllly want a old datsun) but will look at anything, also interested in a GMC Van
Description:
this car start life as a ca20e notch, i bought the car with a bad motor. i swaped in a ka24e, the motor has a newly ported head with a 3 angle valve job, new OEM nissan gaskets from the head up, new TPS, water pump, coolent temp sensor, tune up, custom intake with aftermarket filter, ebay header with 2in exhaust. has new soild motor mounts. i did a bell houseing swap with new oem nissan gasket and gear oil. the trans shifts great. car has s14 front seats and no rear. lowered on cut stock springs, 5mm front wheel spacers, aftermarket 16in rims, wired up a safc still needs to be tuned. current va state inspec. car does run and drive but needs a new ecu(#11) to go over 75mph. i probly will be replacing soon. also has new rear brake pads,new oem brand new BMW m3 fuel pump. im sure im missing something..
i am in the middle of mock up a m90 supercharger, for another $300 ill throw in everything i have for this.. i will remove it, if needed. i will still be working on this so let me know if there is interested in it all motor
Pictures:






heres with the charger.. if you dont like it then dont post. i really dont care..
Last edited by rollingstock; Jul 31, 2011 at 07:37 AM.
willing to swap for a busted up but running civic or integra(i really just need the motor/trans , but i want the whole car MUST BE RUNNING.. i dont really care what it looks likes.. must be 5spd and either d16z6 or LS(b18) if integra. also must have a title.. it can be wrecked or riced out since i wont be doing anything with the shell
and cash on your end
and cash on your end
ill even throw in my 1990 300zx if the trade is right. have clean and clear paper work for both cars.
put the parts from the z on this and have one badass drift or daily..(brakes, lsd, maf, whatever else)
put the parts from the z on this and have one badass drift or daily..(brakes, lsd, maf, whatever else)



