ED6 project (jdm d15, skunk 2, fuel cell,rear brake conversion, mint 90 si trans)
Thread Starter
Registered member
Joined: Oct 2010
Posts: 254
Likes: 0
ED6 project (jdm d15, skunk 2, fuel cell,rear brake conversion, mint 90 si trans)
Name: McKinley
Location: Fredricksburg/Locust Grove
Means of contact: 540 847 4252
Price: $1200 firm (1100 with out the the down payment i have for a paint job at Macco)
Description: For sale is a 88 ed6 project. I bought this car about 6 months ago for a winter project but lost motivation, time, and money.
The car has minor dings and almost unnoticeable exterior damage. I have prime the car with several coats and have painted the side moldings and bumpers as well.
The inside of the car is gutted, painted black, with only one fresh cloth seat. There is a hole in the rear of the car where the gas tank use to be. The previous owners cutt the whole but i had intentions on installing a fuel cell that ive purchased to go along with the car. The previous owners also decided to cut up the cabin harness
The cabin harness battery and radiator are the only thing keeping this car from running
but I’m not prepared to pay someone for the parts and labor.
Uninstalled parts:
98' Jdm d15b dual stage 115,xxx
p28 with jumper harness
90' Si tranny 90,xxx *mint*
Skunk 2 lowering springs*brand new*(installed)
custom rear sway bar
rear brake full conversion and sway bar
Ebay headers
Ebay intake K&N new filter *brand new*
Rci fuel cell, aluminum braded fuel line, walbaro 255 pump *brand new*
new axels
motor mounts
amber corners lights *brand new*
shift linkage with shifter
new hood
2 new windows
door panels
vtec plug tps sensor
1 new tail light
Dx motor harness
clutch cable *brand new*
All I can think of..
Location: Fredricksburg/Locust Grove
Means of contact: 540 847 4252
Price: $1200 firm (1100 with out the the down payment i have for a paint job at Macco)
Description: For sale is a 88 ed6 project. I bought this car about 6 months ago for a winter project but lost motivation, time, and money.
The car has minor dings and almost unnoticeable exterior damage. I have prime the car with several coats and have painted the side moldings and bumpers as well.
The inside of the car is gutted, painted black, with only one fresh cloth seat. There is a hole in the rear of the car where the gas tank use to be. The previous owners cutt the whole but i had intentions on installing a fuel cell that ive purchased to go along with the car. The previous owners also decided to cut up the cabin harness
The cabin harness battery and radiator are the only thing keeping this car from running
but I’m not prepared to pay someone for the parts and labor.
Uninstalled parts:
98' Jdm d15b dual stage 115,xxx
p28 with jumper harness
90' Si tranny 90,xxx *mint*
Skunk 2 lowering springs*brand new*(installed)
custom rear sway bar
rear brake full conversion and sway bar
Ebay headers
Ebay intake K&N new filter *brand new*
Rci fuel cell, aluminum braded fuel line, walbaro 255 pump *brand new*
new axels
motor mounts
amber corners lights *brand new*
shift linkage with shifter
new hood
2 new windows
door panels
vtec plug tps sensor
1 new tail light
Dx motor harness
clutch cable *brand new*
All I can think of..
Last edited by Mokin; Apr 4, 2011 at 08:20 PM. Reason: adding pics
Thread Starter
Registered member
Joined: Oct 2010
Posts: 254
Likes: 0
Re: ED6 project (jdm d15, skunk 2, fuel cell,rear brake conversion, mint 90 si trans
The down payment I have for Macco, the paint job includes the presidential paint at half off because of a sale in February I payed for. It’s good paint. With the paint prepping I’ve done the paint job will only coast 180 dollars additional after the releasing of the car.
gordo loko
Joined: Feb 2010
Posts: 203
Likes: 0
From: WOODBRIDGE VA
Re: ED6 project (jdm d15, skunk 2, fuel cell,rear brake conversion, mint 90 si trans
trade you my h22 ready eg9 sedan shell milano red with everything minus axles for a h22 full swap..it has a mil wire tuck which i just finished last night. descent shell no rust just clear coat is peeling.. PM and let me know if you want pics...(also have a full h22 swap with trans and ecu for 1500 needs cam gears)
Thread Starter
Registered member
Joined: Oct 2010
Posts: 254
Likes: 0
Thread Starter
Registered member
Joined: Oct 2010
Posts: 254
Likes: 0
Re: ED6 project (jdm d15, skunk 2, fuel cell,rear brake conversion, mint 90 si trans
I'm not lookin for another project. to much time and money for me write now.. ill take a trade for a clean runnin car though (ill put a lil money on top)
Last edited by Mokin; Apr 5, 2011 at 05:18 AM.
