CRX track car
Thread Starter
Registered Member
Joined: Sep 2006
Posts: 294
Likes: 0
From: Lynchburg
CRX track car
sold seats and wheels, now have a 1st gen integra fully loaded with D16A1 DOHC (engine needs to be put in car) but 3 cars total for trade/sell
1985 Crx
75,xxx miles on chassis
rebuilt engine (from 85 crx (part car))
-used full synthetic oil
-new valves
-new gaskets all around
-new plugs and wires
-shaved head and intake manifold
new radiator
header and 2.5" exhaust
custom track suspension (adjustable camber kit)
momo steering wheel
4 point racing harness
2 racing seats (one needs light welding done)
GSR Phat Fives with good tires
engine bay painted black
kill switch under steering column
been working on painting inside
8" chrome air filter
SI spoiler (not installed)
New windshield
key for ignition works on doors and hatch
Heat shielding on floor has been removed and sanded for paint, except around shifter (never finished)
Have MSD with rev controller (I dont know if they work, never installed it, came with the car)
New nose piece (the piece below the hood)
I have an extra car for parts that will be included. All interior is included for both cars except 1 carpet and 3 seats. I have one stock one. I also have an extra head, intake manifold, TONS of brand new HONDA parts never opened. I'm not even sure what a lot of them go to, but I have a lot of brake pads, and bushings.
The car is a registered SCCA race car, I have 2 log books to prove it, it is race ready, besides the carb
The car was raced in CA in the late 80's and early 90's. I have pics of it on the track
I have a bigger cam (not installed), I dont know the specs for it, I took it out cause it was getting too much cam for the stock carb
devac on the carb, which does need rebuilding.
This car is extremely loud, and sounds like a v8
$3,500 obo
Email me @ CritchleyJL@yahoo.com, PM me, or text/call 434-841-2202,
Thanks,
Justin
1985 Crx
75,xxx miles on chassis
rebuilt engine (from 85 crx (part car))
-used full synthetic oil
-new valves
-new gaskets all around
-new plugs and wires
-shaved head and intake manifold
new radiator
header and 2.5" exhaust
custom track suspension (adjustable camber kit)
momo steering wheel
4 point racing harness
2 racing seats (one needs light welding done)
GSR Phat Fives with good tires
engine bay painted black
kill switch under steering column
been working on painting inside
8" chrome air filter
SI spoiler (not installed)
New windshield
key for ignition works on doors and hatch
Heat shielding on floor has been removed and sanded for paint, except around shifter (never finished)
Have MSD with rev controller (I dont know if they work, never installed it, came with the car)
New nose piece (the piece below the hood)
I have an extra car for parts that will be included. All interior is included for both cars except 1 carpet and 3 seats. I have one stock one. I also have an extra head, intake manifold, TONS of brand new HONDA parts never opened. I'm not even sure what a lot of them go to, but I have a lot of brake pads, and bushings.
The car is a registered SCCA race car, I have 2 log books to prove it, it is race ready, besides the carb
The car was raced in CA in the late 80's and early 90's. I have pics of it on the track
I have a bigger cam (not installed), I dont know the specs for it, I took it out cause it was getting too much cam for the stock carb
devac on the carb, which does need rebuilding.
This car is extremely loud, and sounds like a v8
$3,500 obo
Email me @ CritchleyJL@yahoo.com, PM me, or text/call 434-841-2202,
Thanks,
Justin
Last edited by Da_Lancer; Apr 19, 2010 at 01:24 PM. Reason: pics
Re: CRX track car