CLEAN DRAG16 WHEELS
doesn't like 1911s
Joined: Jun 2008
Posts: 4,120
Likes: 0
From: 757
Re: CLEAN DRAG16 WHEELS
let me help you...
If you are selling aftermarket wheels it is STRONGLY suggested you list the wheels specs in detail. This goes beyond just the rim diameter. With todays trend of very aggressive offsets, and people who either love or hate it, it will behoove you to give details on your wheels.
You need to post The manditory information in a logical manner to remove confusion.
Wheel Brand
Wheel model
Diameter
Width
Offset
PCD
Tire size
Tire brand
Tire model
Tread life left
For instance:
F.S. BBS LMs. 18x12 +8 rear, 18x11 +16 front.
Tires are 165/30/18s rear and 155/35/18 front.
Approximately 90% tread left on the outside, and completely bald on the inside as I run 17 degrees of camber to make these fit.
Simply saying "I have 18" BBS LMs for a Nissan" just doesn't cut it anymore.
Again, this isn't a rule but it is STRONGLY suggested you do so.
You need to post The manditory information in a logical manner to remove confusion.
Wheel Brand
Wheel model
Diameter
Width
Offset
PCD
Tire size
Tire brand
Tire model
Tread life left
For instance:
F.S. BBS LMs. 18x12 +8 rear, 18x11 +16 front.
Tires are 165/30/18s rear and 155/35/18 front.
Approximately 90% tread left on the outside, and completely bald on the inside as I run 17 degrees of camber to make these fit.
Simply saying "I have 18" BBS LMs for a Nissan" just doesn't cut it anymore.
Again, this isn't a rule but it is STRONGLY suggested you do so.
