ls swap?
Thread Starter
Registered Member
Joined: Nov 2008
Posts: 526
Likes: 0
From: Roanoke Va
ls swap?
What do i need to do a ls swap in a 89 civic sedan? A list of things and links would be appreciated the car has a d15 dual point motor in it now.
this is what i know
the motor
tranny
linkages
mounts
and a diffrente harness w/ injectors and im stuck from here anythng will help
this is what i know
the motor
tranny
linkages
mounts
and a diffrente harness w/ injectors and im stuck from here anythng will help
Registered member
Joined: Jun 2007
Posts: 728
Likes: 0
Re: ls swap?
You have the parts needed in this list. You will have to use the DPFI harness and wire in the 2 extra injectors. I am sure that the MPFI harness will not connect to the firewall connections on a DPFI car. The wiring is not bad, but time consumming. Make sure that you do the wiring out of the car and take you time to do it right.
Also if you put the hydro trans in the 89 you will need the hydro to cable conversion unless you are getting a cable trans then you will not need the conversion/adapter.
What ECU are you using? if it is an OBD1 then you will need a conversion harness along with the kit to convert the car to OBD1
Also if you put the hydro trans in the 89 you will need the hydro to cable conversion unless you are getting a cable trans then you will not need the conversion/adapter.
What ECU are you using? if it is an OBD1 then you will need a conversion harness along with the kit to convert the car to OBD1
Thread
Thread Starter
Forum
Replies
Last Post
sTohc4door
Engine / Exhaust / Drivetrain
0
Feb 18, 2009 05:23 PM
vtec2.0
Parts ARCHIVE
20
Nov 16, 2008 04:42 AM
dfoxengr
Parts ARCHIVE
3
Jan 31, 2008 07:42 AM
jdmontheway
Parts ARCHIVE
0
Sep 16, 2007 10:40 PM