F/S 1/18 BRUSHLESS DURATRAX VENDETTA ST
Duratrax vendetta st purchased new this spring.I pretty much use it as an on road truck as it does not have enough ride height to run it offroad where I live.We have no dirt tracks here and this is a vehicle best for a prepared track.It has had 2 packs through it since april,look at the tires and chassis and you can tell its barely been ran.The tazer ESC was just purchased last thursday.The truck is ARR,all thats needed is connectors on the battery.This thing is rediculously fast and does wing dragging wheelies on demand with a lipo pack.I ran it using a 1320 lipo 2s and was going to try a 3s but the 2s is more than enough.$200.Comes with the following.......
radio
RX
Brand new ,Dynamite mini tazer sensored/sensorless brushless ESC
Mamba 8000kv motor
servo
7.2v 650mah battery pack
4 new diff pinion gears
blue alu heatsink
blu alu front brace
motor mount
motor spacers for 13/19/11/16/21T pinion gears
Extra dog bone cups
There are some hop ups installed on the truck also
graphite battery strap
graphite front brace
Full steel cvd's
3 complete sway bar sets hard,med,soft



radio
RX
Brand new ,Dynamite mini tazer sensored/sensorless brushless ESC
Mamba 8000kv motor
servo
7.2v 650mah battery pack
4 new diff pinion gears
blue alu heatsink
blu alu front brace
motor mount
motor spacers for 13/19/11/16/21T pinion gears
Extra dog bone cups
There are some hop ups installed on the truck also
graphite battery strap
graphite front brace
Full steel cvd's
3 complete sway bar sets hard,med,soft



Thread
Thread Starter
Forum
Replies
Last Post




