KA24E rebuilt head/block + more...
Thread Starter
psycho jungle cat
Joined: Aug 2003
Posts: 7,124
Likes: 0
From: 757/910
KA24E rebuilt head/block + more...
$200 for everything!
KA24E stripped manifold: No emissions whatsoever, only the essentials, no butterflies either.
FULL KA24E exhaust: Includes ex mani/cat converter/cat-back with aftermarket muffler.
KA24E Head: $200
head was rebuilt at Ballos Machinery and also resurfaced and 3 angle valve job, new valves/seals, springs and retainers.
KA24E Block: $100
block was hot tanked and bored .020" and resurfaced at Ballos Machinery off of Staples Mill
KA24E bottom end w/everything: Make Offer
just removed the head to have lifters swapped into another motor. In good shape, just needs a head.
KA24E block: Make Offer
Good for those whose engines decided the rod would make a vent hole in theirs. Has 2 pistons still in it, ill have to take pics.
KA24E head: Make Offer
needs new valve seals and rocker arms
You can reach me through PM or 757-685-1718. If you do not have serious interest DO NOT WASTE MY TIME!
KA24E stripped manifold: No emissions whatsoever, only the essentials, no butterflies either.
FULL KA24E exhaust: Includes ex mani/cat converter/cat-back with aftermarket muffler.
KA24E Head: $200
head was rebuilt at Ballos Machinery and also resurfaced and 3 angle valve job, new valves/seals, springs and retainers.
KA24E Block: $100
block was hot tanked and bored .020" and resurfaced at Ballos Machinery off of Staples Mill
KA24E bottom end w/everything: Make Offer
just removed the head to have lifters swapped into another motor. In good shape, just needs a head.
KA24E block: Make Offer
Good for those whose engines decided the rod would make a vent hole in theirs. Has 2 pistons still in it, ill have to take pics.
KA24E head: Make Offer
needs new valve seals and rocker arms
You can reach me through PM or 757-685-1718. If you do not have serious interest DO NOT WASTE MY TIME!
Last edited by Spindrift; May 18, 2008 at 05:18 AM. Reason: added things
Thread Starter
psycho jungle cat
Joined: Aug 2003
Posts: 7,124
Likes: 0
From: 757/910
Re: KA24E rebuilt head/block + more...
The intake mani I have is a stripped down version(no EGR/vac lines/coolant lines)
And yea I got a fuel rail too, LOTS of extra parts, just ask if you need something.
And yea I got a fuel rail too, LOTS of extra parts, just ask if you need something.