gsr head torque specs????

Reply Subscribe

Thread Tools

Nov 22, 2006 | 11:56 AM

BOOSTED-EK

Thread Starter

Crv-tec ??

Joined: Sep 2005

Posts: 997

Likes: 0

From: 4+3+4

gsr head torque specs????

im doing a b20 vtec swap.. i put the head on and need to know the torque specs for the studs holding the cams.

Nov 22, 2006 | 12:01 PM

ZeroMR

I'm still slow.....

Joined: Jul 2003

Posts: 505

Likes: 0

From: F-burg

Re: gsr head torque specs????

19ftlbs for the big bolts and 8ftlbs for the small ones.

Nov 22, 2006 | 12:25 PM

BOOSTED-EK

Thread Starter

Crv-tec ??

Joined: Sep 2005

Posts: 997

Likes: 0

From: 4+3+4

Re: gsr head torque specs????

Quote:

Originally Posted by ZeroMR

19ftlbs for the big bolts and 8ftlbs for the small ones.

thanks alot man!!

Nov 22, 2006 | 12:33 PM

ZeroMR

I'm still slow.....

Joined: Jul 2003

Posts: 505

Likes: 0

From: F-burg

Re: gsr head torque specs????

Actually it's 20ftlbs for the 8mm bolts and 86in-lbs for the 6mm bolts.

Nov 22, 2006 | 01:05 PM

BOOSTED-EK

Thread Starter

Crv-tec ??

Joined: Sep 2005

Posts: 997

Likes: 0

From: 4+3+4

Re: gsr head torque specs????

Quote:

Originally Posted by ZeroMR

Actually it's 20ftlbs for the 8mm bolts and 86in-lbs for the 6mm bolts.

damit a little to late on the smaler ones.... I just snaped one of them.... and when you say 6mm bolts are you talking about the actual shaft because the smalest head is 10mm and the other bolt head is 12mm...?

Nov 22, 2006 | 01:10 PM

ZeroMR

I'm still slow.....

Joined: Jul 2003

Posts: 505

Likes: 0

From: F-burg

Re: gsr head torque specs????

Yes I was talking about the shaft. So the 10mm head would be the 6mm, and the 12mm head would be the 8mm bolt. Which one did you snap, the small or bigger bolt?

Nov 22, 2006 | 01:58 PM

BOOSTED-EK

Thread Starter

Crv-tec ??

Joined: Sep 2005

Posts: 997

Likes: 0

From: 4+3+4

Re: gsr head torque specs????

Quote:

Originally Posted by ZeroMR

Yes I was talking about the shaft. So the 10mm head would be the 6mm, and the 12mm head would be the 8mm bolt. Which one did you snap, the small or bigger bolt?

the smaller one the 10mm/6mm it like stretched apart....