Read over these links:

http://honda-tech.com/zerothread?id=699787
http://www.ef-honda.com/ben/Badidle.php

More than likely its the FIT valve...

 

Ok i cleaned out the iacv and the throttal body and it is still doing the same thing. is there any thing elss?
I am changing the pcv next along with the upper hose that leads to the intk manifold the hose is caved ion a little so that is next.Is there any thing elss that could be wrong?

 

yeah you completely missed the thermowax valve thing. its the valve under the t/b. its out of adjustment you fool! lol anyhow take the 2 screws off the end and use a big flat head to tighten the large white thing in the middle.
THIS IS NOT THE IACV.

 

do i have to take it off the t/b or can i just leave it on. also when i unscrew it will coolent come out? also nother ? what would cause your car to like shut off and turne its self back on while driving, this has happend a couple of times and wunder ign what this was.

 

any one also know where the middle were goes to on the map sensor plug
i check the valtage and it said that it was ssapoed to be at 5v but i only got 3.5. and every thing elss i ched out vaultage wise was straight

 

wow

 

Yeah, you just want to bang your head against a brick wall until your brain oozes out of your eyeballs, right?

 

opps sorry for the ****up on the not and what middle __________ hear is what i ment.


any one also know where the middle wire goes to the blue/red wire on the map sensor plug.
i check the valtage and it said that it was ssapoed to be at 5v but i only got 3.5. and every thing elss i ched out vaultage wise was straight

 

*cricket*

 

#1 it will idle ok with out the map sensor. its your FITV , the thing under the Throttle body that needs adjustment.

#2 its ok to cuss, we are all adults here.

#3 PLEASE READ AND CORRECT YOUR SPELLINGS ( i.e. "vaultage": VOLTAGE "ssapoed": supposed? ) again we are all adults here, we cannot help you if we cannot comprehend what you are trying to explain.

#4 welcome to dragva.com