VADriven.com Forums

Notices
Cycle Corner Running with two less wheels than everyone else? This forum is for you.

Cycle whore thread

Thread Tools
 
Old Nov 28, 2012 | 09:35 AM
Share
  #15341  
dyoungin''s Avatar
dyoungin'
slingshot engage.
 
Joined: Jun 2010
Posts: 1,851
Likes: 0
dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin'
Default Re: Cycle whore thread
Edit: Use to be called Rogue Status now it's called DTA Posse (Don't Trust Anyone Posse).
Reply
Old Nov 28, 2012 | 10:00 AM
Share
  #15342  
Schlitz's Avatar
Schlitz
armed teetotaler
 
Joined: Jul 2011
Posts: 1,599
Likes: 0
From: RVA
Schlitz Schlitz Schlitz Schlitz Schlitz Schlitz Schlitz Schlitz Schlitz Schlitz Schlitz
Default Re: Cycle whore thread




Reply
Old Nov 28, 2012 | 11:26 AM
Share
  #15343  
Hicky's Avatar
Hicky
SPARKLE.motion
 
Joined: Mar 2007
Posts: 3,601
Likes: 0
Hicky Hicky Hicky Hicky Hicky Hicky Hicky Hicky Hicky Hicky Hicky
Default Re: Cycle whore thread
Heath, what were you doing at Coleman PowerSports yesterday?
Reply
Old Nov 28, 2012 | 11:56 AM
Share
  #15344  
dyoungin''s Avatar
dyoungin'
slingshot engage.
 
Joined: Jun 2010
Posts: 1,851
Likes: 0
dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin' dyoungin'
Default Re: Cycle whore thread
Dropped the price on my Husky a good bit. Need to move it.
Reply
Old Nov 28, 2012 | 12:37 PM
Share
  #15345  
Halfrican's Avatar
Halfrican
I like grape drank
 
Joined: Aug 2006
Posts: 11,610
Likes: 0
Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican
Default Cycle whore thread
What can I use to remove powder coat easily?


Small angle grinder with a wire wheel do the trick?
Reply
Old Nov 28, 2012 | 12:41 PM
Share
  #15346  
Hicky's Avatar
Hicky
SPARKLE.motion
 
Joined: Mar 2007
Posts: 3,601
Likes: 0
Hicky Hicky Hicky Hicky Hicky Hicky Hicky Hicky Hicky Hicky Hicky
Default Re: Cycle whore thread
Aircraft Remover? I use that to remove paint off some BMW wheels. All I had to do was brush it on the wheel, let is soak and do its thing, then wash off and dry. It's a pain to work with though. If it gets on your skin, it burns like hell.
Reply
Old Nov 28, 2012 | 03:51 PM
Share
  #15347  
Halfrican's Avatar
Halfrican
I like grape drank
 
Joined: Aug 2006
Posts: 11,610
Likes: 0
Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican
Default Cycle whore thread
Hmm. That may be the way to go with this. I'll have to be very careful as things are packed tightly in the new garage.

Thanks!
Reply
Old Nov 28, 2012 | 03:58 PM
Share
  #15348  
Southwade's Avatar
Southwade
TwoWheels YearRound
 
Joined: Mar 2010
Posts: 12,705
Likes: 0
From: Inside the Beltway
Southwade Southwade Southwade Southwade Southwade Southwade Southwade Southwade Southwade Southwade Southwade
Default Re: Cycle whore thread
Originally Posted by Hicky
Heath, what were you doing at Coleman PowerSports yesterday?
missing my bike

I went to see if they had any 2013s in stock.

Originally Posted by Halfrican
What can I use to remove powder coat easily?


Small angle grinder with a wire wheel do the trick?
Aircraft paint remover should do it. You will probably have to do a few coats though.
Reply
Old Nov 28, 2012 | 05:46 PM
Share
  #15349  
paperassgasket's Avatar
paperassgasket
Band
 
Joined: Feb 2010
Posts: 9,553
Likes: 0
From: DayCrew
paperassgasket paperassgasket paperassgasket paperassgasket paperassgasket paperassgasket paperassgasket paperassgasket paperassgasket paperassgasket paperassgasket
Default Re: Cycle whore thread
where the fuck is Joey? he needs to see this:



Reply
Old Nov 28, 2012 | 06:02 PM
Share
  #15350  
Halfrican's Avatar
Halfrican
I like grape drank
 
Joined: Aug 2006
Posts: 11,610
Likes: 0
Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican Halfrican
Default Cycle whore thread
Oh hey. It's joeys bike in the future.
Reply



Advanced Search

All times are GMT -8. The time now is 07:21 PM.