I heard trendy stickers are more sticky than not-so trendy one's. A LOT of elbow grease would be needed for that job.

 

also, fuck fiberglass...

 

Thats what I said, 'till I decided on the frame brace. Now it's just aesthetic.

 

I don't think I like the color...

found here: http://standardfunctions.com/index.p...age-parts.html

 

Thats pretty sick heath. But yes it doesn't go with your color combination.

 

 

Ok please excuse my ignorance, how can I adjust my IDLE? I think it's idling too low which is why it keeps dying, any help would be greatly appreciated!!!!!

Oh and what is the meaning of "rejetting"?

Thanks guys.

 

there is a screw where the throttle cable is attached to on the carb. Use a phillips screw driver, turning the screw clockwise raises your idle and counter lowers it.

 

Rejetting the carb usually consist of changing the main jet or the slow jet. This is how the carb works;

Slow jet controls idle-1/4% throttle
Needle controls 1/4-3/4% throttle
Main jet controls 3/4-100% throttle
Idle mixture controls air/fuel mixture throughout the 0-100 throttle range.

What are your mods?

 

Bone stock, I just tried to adjust the idle but it didn't help going to clean and rebuild the carb