ive been looking how to convert my b16 from obd0 to obd1, different sites tell me different things i need can somebody tell me everything ill need to convert

 

http://www.honda-tech.com/showthread.php?t=1319235
Just be patient as others will also chip in.

 

be careful with these writeups, they differ depending on who wrote it...also take note of the wire colors that you car uses, 88, 91, si, dx wiring is all different. here are some helpful links:

hondahookup.com

http://www.superhonda.com/forum/f55/...inouts-217405/

http://crxcommunity.com/viewtopic.ph...c49c15f93079f4

http://www.hondata.com/techwiringpw0.html

please note to do research on those specific circuits that differ throughout the years..
hope this helps

 

If you're car is obd0 you will need a obd1 dist, obd1 ecu, ecu jumper harness, and dist adapter harness.

 

yea thats all i thought i needed was an obd1 dizzy,p28, ecu harness and adapter harness. some write ups were sayin i need obd1 injectors,throttle body, intake mani etc.

 

also need a 4 wire o2 sensor.

 

This is true. I didn't think about it since my ecu is chipped and I just turned it off.