FS: H22 longblock , H22 shortblock , H22 turbo manifold , Tanabe muffler
Thread Starter
Registered member
Joined: May 2006
Posts: 3,781
Likes: 0
From: Roanoke
FS: H22 longblock , H22 shortblock , H22 turbo manifold , Tanabe muffler
Here's more stuff from the racecar project i recently bought....
H22A4 long block.stock internals....dropped a valve.head is basically useless.short block has a busted up piston.may be able to overbore the stock sleeve,or may need to be sleeved.perfect for somebody wanting a short block to build up.pictures to come later of the internal damage.mising the lower timign belt pulley and water pump..
$100 for the short block.PICK-UP ONLY!
see new post below for internal pics
SOLD!!!Drag H22 turbo manifold.Great condition-no cracks or imperfections.$100:SOLD!!!
SOLD!!!Tanabe G Power Medallion muffler.had additional hangers welded on at some point.i cut them off and smoothed the can as best i could.shouldn't be able to see themarks when it's mounted on the car.$40:SOLD!!!
Parts from the H22 head from the US block below.head cating is junk,most everything else is good.cam caps,VTEC solenoid,cams,valve cover,etc...tell me what you need.$$
MORE BELOW!KEEP SCROLLING!
H22A4 long block.stock internals....dropped a valve.head is basically useless.short block has a busted up piston.may be able to overbore the stock sleeve,or may need to be sleeved.perfect for somebody wanting a short block to build up.pictures to come later of the internal damage.mising the lower timign belt pulley and water pump..
$100 for the short block.PICK-UP ONLY!
see new post below for internal pics
SOLD!!!Drag H22 turbo manifold.Great condition-no cracks or imperfections.$100:SOLD!!!
SOLD!!!Tanabe G Power Medallion muffler.had additional hangers welded on at some point.i cut them off and smoothed the can as best i could.shouldn't be able to see themarks when it's mounted on the car.$40:SOLD!!!
Parts from the H22 head from the US block below.head cating is junk,most everything else is good.cam caps,VTEC solenoid,cams,valve cover,etc...tell me what you need.$$
MORE BELOW!KEEP SCROLLING!
Last edited by TNGChris; Feb 4, 2008 at 01:13 PM.
Thread Starter
Registered member
Joined: May 2006
Posts: 3,781
Likes: 0
From: Roanoke
Re: FS: H22 longblock , H22 shortblock , H22 turbo manifold , Tanabe muffler
H22 JDM short block.stock internals.i do have the windage tray and oil pickup to be included.missing water pipe on the back of the block.$125.Pick-UP ONLY!:
All prices do not include shipping.
located in Roanoke,VA.Paypal add 3%.
many vouches if needed.
THANKS
Chris
All prices do not include shipping.
located in Roanoke,VA.Paypal add 3%.
many vouches if needed.
THANKS
Chris
Last edited by TNGChris; Feb 4, 2008 at 01:11 PM.
Thread Starter
Registered member
Joined: May 2006
Posts: 3,781
Likes: 0
From: Roanoke
Re: FS: H22 longblock , H22 shortblock , H22 turbo manifold , Tanabe muffler
USDM long block pics:
one bad piston.lots of crap in the other cylinders,but i think it may be able to be overbored and keep the stock sleeves.obviously,it can definitely be sleeved.crank looks good as far as i can tell.only problem looks to be the one rod and piston.great for somebody wanting to build a strong bottom end.
Thanks
Chris
one bad piston.lots of crap in the other cylinders,but i think it may be able to be overbored and keep the stock sleeves.obviously,it can definitely be sleeved.crank looks good as far as i can tell.only problem looks to be the one rod and piston.great for somebody wanting to build a strong bottom end.
Thanks
Chris
Last edited by TNGChris; Jan 29, 2008 at 03:44 PM.