Z28 350, block, pistons, new crank CHEAP
#1
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Richmond,Va
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Z28 350, block, pistons, new crank CHEAP
I have a 40 over bore 350 block, just done, decked and cleaned (Its a mid 70s 010 block) $320 in machine work. $100
NEW standerd "scat" crank $100
NEW 40 over pistons and high perf rings $100
1968 Z28 heads (yes big valves from the factory), on a 1986 305 bottom end (dont ask), clean and runs but seems like the valve seals are on the way out. On Ebay the heads go for 300+ needing rebuilding. I'll take $200 for the heads including the 305, 3 diff intakes and some 305 HO heads. I think thats pretty fair dont you?
I just need to make this stuff move. Everything is near the airport (richmond)
NEW standerd "scat" crank $100
NEW 40 over pistons and high perf rings $100
1968 Z28 heads (yes big valves from the factory), on a 1986 305 bottom end (dont ask), clean and runs but seems like the valve seals are on the way out. On Ebay the heads go for 300+ needing rebuilding. I'll take $200 for the heads including the 305, 3 diff intakes and some 305 HO heads. I think thats pretty fair dont you?
I just need to make this stuff move. Everything is near the airport (richmond)
#2
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Richmond,Va
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: Z28 350, block, pistons, new crank CHEAP
up
#3
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Richmond,Va
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: Z28 350, block, pistons, new crank CHEAP
up
#4
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Richmond,Va
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: Z28 350, block, pistons, new crank CHEAP
up
#5
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Richmond,Va
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: Z28 350, block, pistons, new crank CHEAP
up
#6
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Richmond,Va
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: Z28 350, block, pistons, new crank CHEAP
uppppppppp
#7
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Richmond,Va
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: Z28 350, block, pistons, new crank CHEAP
up
#8
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Richmond,Va
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: Z28 350, block, pistons, new crank CHEAP
up
#9
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Richmond,Va
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Re: Z28 350, block, pistons, new crank CHEAP
upppppppppp
Thread
Thread Starter
Forum
Replies
Last Post
JimmySteezen757
Engine / Exhaust / Drivetrain
7
02-14-2009 10:10 AM