Simplsi's sale - Turbo engine/ parts / seats
#1
Capt. Spaulding
Thread Starter
Join Date: Oct 2004
Location: arlington va
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Simplsi's sale - Turbo engine/ parts / seats
Parting out what I have left sitting at my house.
First off I will be selling my 00' Si shell. If anyone is interested just PM.
First off my 08' FG si seats, with steel rails I custom made to fit the EK / EM1 chasis. Absolutely perfect material condition, the plastic part on the lower seat (the part you don't see, has a few scratches) People say they sit to high, I am 6'6 and fit in them just fine. $1000 obo
InlinePRO 3in. Turbo exhaust for EK chasis. I cut the end off and welded a vibrant performance flat black muffler on the end. It is completely sleeper looking, sounds great, and looks amazing. $500
Gator Racing Stage III axles rated for 450hp. Never even got to use them (however they are used) $300obo
B16 stock axles and GSR stock axles $80obo each
Skunk2 Pro series intake manifold used barely, great condition $200obo
3inch V-Band down Pipe (great condition) $200obo
Precision 600hp intercooler - 2 charge pipes (1 that connected to my turbo, 1 that went and connected to where the intake pipe would have gone) $300obo
Custom made 3inch headers, in my opinion the best all motor header you can find $450obo
OEM EBP rear lip (discontinued, extremely hard to find) great condition $450obo
The engine:
I had this engine sent across country back, in-out, all over.
It's a fully built LS/VTEC
I have over 12k invested into the engine build alone, I am going to ask what you would pay for an ITR engine. $4500
To give you an idea on power. Before I turboed it, it was running all motor 215hp, turboed on 16psi makes 433hp, unlimited possibilities with this set-up.
B18b1
2.0
Darton sleves
CP 9.5.1 pistons
Eagle rods
LS crank
Tapped oil pan
B16A2
Type-R cams
InlinePRO cam gears
InlinePRO valves, springs, retainers
3 angles valve job
I am going to be selling my transmissions and clutches apart of the engine
Stock B16 transmission, has small scrape inside of casing, no problems at all. $700obo
JDM GSR transmission with quaife LSD $1200obo
Competition Clutch twin disc 6 puck, used for a month, perfect condition $800obo
Competition Clutch single disc 6 puck, used, great condition $650obo
All parts are located in NOVA. I will be willing to make a deal if someone wants to buy the engine with the shell, or the engine with a trans and a clutch, or any combo of parts.
Many people can vouch for the quality of the parts I own. And Johnny no low balling me.
First off I will be selling my 00' Si shell. If anyone is interested just PM.
First off my 08' FG si seats, with steel rails I custom made to fit the EK / EM1 chasis. Absolutely perfect material condition, the plastic part on the lower seat (the part you don't see, has a few scratches) People say they sit to high, I am 6'6 and fit in them just fine. $1000 obo
InlinePRO 3in. Turbo exhaust for EK chasis. I cut the end off and welded a vibrant performance flat black muffler on the end. It is completely sleeper looking, sounds great, and looks amazing. $500
Gator Racing Stage III axles rated for 450hp. Never even got to use them (however they are used) $300obo
B16 stock axles and GSR stock axles $80obo each
Skunk2 Pro series intake manifold used barely, great condition $200obo
3inch V-Band down Pipe (great condition) $200obo
Precision 600hp intercooler - 2 charge pipes (1 that connected to my turbo, 1 that went and connected to where the intake pipe would have gone) $300obo
Custom made 3inch headers, in my opinion the best all motor header you can find $450obo
OEM EBP rear lip (discontinued, extremely hard to find) great condition $450obo
The engine:
I had this engine sent across country back, in-out, all over.
It's a fully built LS/VTEC
I have over 12k invested into the engine build alone, I am going to ask what you would pay for an ITR engine. $4500
To give you an idea on power. Before I turboed it, it was running all motor 215hp, turboed on 16psi makes 433hp, unlimited possibilities with this set-up.
B18b1
2.0
Darton sleves
CP 9.5.1 pistons
Eagle rods
LS crank
Tapped oil pan
B16A2
Type-R cams
InlinePRO cam gears
InlinePRO valves, springs, retainers
3 angles valve job
I am going to be selling my transmissions and clutches apart of the engine
Stock B16 transmission, has small scrape inside of casing, no problems at all. $700obo
JDM GSR transmission with quaife LSD $1200obo
Competition Clutch twin disc 6 puck, used for a month, perfect condition $800obo
Competition Clutch single disc 6 puck, used, great condition $650obo
All parts are located in NOVA. I will be willing to make a deal if someone wants to buy the engine with the shell, or the engine with a trans and a clutch, or any combo of parts.
Many people can vouch for the quality of the parts I own. And Johnny no low balling me.
Last edited by simplsi; 05-13-2008 at 08:18 AM.
#2
JB-AP1 (Johnny)
Join Date: Jan 2007
Location: In a fucking cubicle
Posts: 1,829
Likes: 0
Received 0 Likes
on
0 Posts
Re: Simplsi's sale - Turbo engine/ parts / seats
Darnnn I get a shout out haha I was about to Start.... lolz Good luck with sales and Great seller and guy everyone.. Brian I will let you know about the stuff i need..
#3
Capt. Spaulding
Thread Starter
Join Date: Oct 2004
Location: arlington va
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Re: Simplsi's sale - Turbo engine/ parts / seats
well guys, I just got the go ahead I could sell the shell.
I don't know exactly how this would be the best.
I can sell someone just the shell (complete interior and exterior)
I can sell it as a almost complete car, keep my motor listed above still in it (and you just need to get some few other things to have a awesome set-up)
or I can put the car completely back together and sell it.
so if anyone is interested in any possible way, let me know.
I don't know exactly how this would be the best.
I can sell someone just the shell (complete interior and exterior)
I can sell it as a almost complete car, keep my motor listed above still in it (and you just need to get some few other things to have a awesome set-up)
or I can put the car completely back together and sell it.
so if anyone is interested in any possible way, let me know.
#5
Capt. Spaulding
Thread Starter
Join Date: Oct 2004
Location: arlington va
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Re: Simplsi's sale - Turbo engine/ parts / seats
sorry, someone already spoke for the mani
#6
Capt. Spaulding
Thread Starter
Join Date: Oct 2004
Location: arlington va
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Re: Simplsi's sale - Turbo engine/ parts / seats
up
#7
Re: Simplsi's sale - Turbo engine/ parts / seats
those arent gator axles and stage 3s arent rated for 450hp. This is a gator axle
#8
Capt. Spaulding
Thread Starter
Join Date: Oct 2004
Location: arlington va
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Re: Simplsi's sale - Turbo engine/ parts / seats
the ones you posted are newer version, mine are years old.
#9
Capt. Spaulding
Thread Starter
Join Date: Oct 2004
Location: arlington va
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Re: Simplsi's sale - Turbo engine/ parts / seats
Bump for these parts to be gone.
#10
Capt. Spaulding
Thread Starter
Join Date: Oct 2004
Location: arlington va
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
Re: Simplsi's sale - Turbo engine/ parts / seats
up