FT: Fully Built D16Z6 and turbo setup for nice B-series VTEC swap
#1
FT: Fully Built D16Z6 and turbo setup for nice B-series VTEC swap
My EK is currently up for sale, but I figured I would give this a shot as well. If anyone is willing to trade setups with me, I'll be keeping the EK.
So here it goes
Engine:
D16Z6
y8 intake manifold
JE 9:1 forged pistons
Eagle H-beam connecting rods
Supertech Valvesprings and retainers
SUPER fresh EX tranny
daikin dual diaphragm pressure plate with ACT unsprung 4-puck
Turbo setup:
SFAB miniram
Garrett 60-1 .63 A/R Stage 3 wheel
BRAND NEW HKS SSQV
SFAB chargepipes (2.5" cold, 2.0" hot)
XSpower 38mm wastegate
TiAL 14.50psi spring
HKS Type 0 turbo timer/96-00 harness
880cc Siemens Peak and Hold injectors
Large ebay intercooler (can get dimensions if really needed)
Phearable.net SOHC VTEC ecu w/ Neptune part-throttle tune
I'm tired as I'm typing this up, so if I am forgetting anything obvious, just ask me.
Mostly looking for a B18C, but LS/VTEC or B16A will be fine too. All swaps must be complete, as in ecu, tranny, linkage, etc. Thanks guys.
So here it goes
Engine:
D16Z6
y8 intake manifold
JE 9:1 forged pistons
Eagle H-beam connecting rods
Supertech Valvesprings and retainers
SUPER fresh EX tranny
daikin dual diaphragm pressure plate with ACT unsprung 4-puck
Turbo setup:
SFAB miniram
Garrett 60-1 .63 A/R Stage 3 wheel
BRAND NEW HKS SSQV
SFAB chargepipes (2.5" cold, 2.0" hot)
XSpower 38mm wastegate
TiAL 14.50psi spring
HKS Type 0 turbo timer/96-00 harness
880cc Siemens Peak and Hold injectors
Large ebay intercooler (can get dimensions if really needed)
Phearable.net SOHC VTEC ecu w/ Neptune part-throttle tune
I'm tired as I'm typing this up, so if I am forgetting anything obvious, just ask me.
Mostly looking for a B18C, but LS/VTEC or B16A will be fine too. All swaps must be complete, as in ecu, tranny, linkage, etc. Thanks guys.
Thread
Thread Starter
Forum
Replies
Last Post
gotboosthatch
Parts ARCHIVE
7
10-06-2007 09:16 PM