FS: Honda/Turbo parts
#1
FS: Honda/Turbo parts
Come get it all, everything for $100.
You can even have the Y8 head that the AEM cam gear is attached to if you give me $110 for all of it. That's a $10 y8 head.
We all know that when putting together a setup, you acquire a lot of parts. Some things included in deals, some things you thought you'd need, some things that you just couldn't pass up. Well, when everything is said and done, you almost always have stuff laying around that you don't have any use for. Lowballs are welcomed, but anything too ridiculous will just be ignored. I am open to any and all trades for honda or turbo parts, so let me know what you have.
Nippon Racing D-Series Turbo Pistons
These are 75mm, low compression, cast d-series pistons. They are basically the same thing as a suzuki vitara piston. I don't have any use for these. Take them. $50 OBO
Greddy Type S knockoff blow off valve
This is a brand new knockoff Type-S bov. It comes with everything, hardware, gasket, etc. The bov will work great, alot of people don't realize that for these to work correctly on lower boost levels, you must remove one of the springs. This has already been done on this valve, and the larger spring is included as well for higher boost applications. Let's say $20 OBO
D16Z6 intake manifold with GSR throttle body
Pretty self explanatory. I don't want it. Make an offer and it's yours.
MSD coil
I don't know or care how much this thing is worth. Take it. Make an offer and it's yours.
Dual Diaphragm D16 pressure plate
Used, but still would be great for a little budget boost on your single cam. The hardest grabbing pressure plate you'd want to DD with on a single cam, with a nice 6 puck or something, this thing will hold some decent power. Make an offer and it's yours.
D16A6 rods and pistons
Self explanatory. If nothing else, you could make ash trays or something out of them, or a coffee table if you have welding skills that pay the bills. Make an offer and you can have them.
Various 92-95 Civic/94-01 Integra chargepipes
Probably the most useful one I have is the upper cold side pipe, flanged for an HKS SSQV blow off valve. Make an offer and take it home, perfect for if you got a charge pipe set and it is flanged for the wrong bov.
I'll ship any of these things at buyers expense. Local pickup is also available. Paypal is preferred if the buyer prefers to ship, paypal or cash is preferred on pickup.
You can even have the Y8 head that the AEM cam gear is attached to if you give me $110 for all of it. That's a $10 y8 head.
We all know that when putting together a setup, you acquire a lot of parts. Some things included in deals, some things you thought you'd need, some things that you just couldn't pass up. Well, when everything is said and done, you almost always have stuff laying around that you don't have any use for. Lowballs are welcomed, but anything too ridiculous will just be ignored. I am open to any and all trades for honda or turbo parts, so let me know what you have.
Nippon Racing D-Series Turbo Pistons
These are 75mm, low compression, cast d-series pistons. They are basically the same thing as a suzuki vitara piston. I don't have any use for these. Take them. $50 OBO
Greddy Type S knockoff blow off valve
This is a brand new knockoff Type-S bov. It comes with everything, hardware, gasket, etc. The bov will work great, alot of people don't realize that for these to work correctly on lower boost levels, you must remove one of the springs. This has already been done on this valve, and the larger spring is included as well for higher boost applications. Let's say $20 OBO
D16Z6 intake manifold with GSR throttle body
Pretty self explanatory. I don't want it. Make an offer and it's yours.
MSD coil
I don't know or care how much this thing is worth. Take it. Make an offer and it's yours.
Dual Diaphragm D16 pressure plate
Used, but still would be great for a little budget boost on your single cam. The hardest grabbing pressure plate you'd want to DD with on a single cam, with a nice 6 puck or something, this thing will hold some decent power. Make an offer and it's yours.
D16A6 rods and pistons
Self explanatory. If nothing else, you could make ash trays or something out of them, or a coffee table if you have welding skills that pay the bills. Make an offer and you can have them.
Various 92-95 Civic/94-01 Integra chargepipes
Probably the most useful one I have is the upper cold side pipe, flanged for an HKS SSQV blow off valve. Make an offer and take it home, perfect for if you got a charge pipe set and it is flanged for the wrong bov.
I'll ship any of these things at buyers expense. Local pickup is also available. Paypal is preferred if the buyer prefers to ship, paypal or cash is preferred on pickup.
Last edited by sh!ttyLS; 01-31-2008 at 02:42 PM.
#2
Re: FS: Honda/Turbo parts
Where u located at. Very interested in the Greddy BOV! I'm in VA Beach.
#3
Re: FS: Honda/Turbo parts
PM'd you.
Also for sale, AEM tru-time cam gear for D16Y8. Make an offer.
Also for sale, AEM tru-time cam gear for D16Y8. Make an offer.
#5
Re: FS: Honda/Turbo parts
Will trade anything, or everything, for a working manual boost controller. Any takers?
#6
Ohhh Snap
Join Date: Oct 2007
Location: Virginia beach
Posts: 4,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: Honda/Turbo parts
LOCATION! not only one person wants to know,so a pm does no good.
#8
Re: FS: Honda/Turbo parts
Bump, come on, I will let all of this shit go for $100, you will not beat that anywhere. Come get it.
#10
Re: FS: Honda/Turbo parts
Yes, everything listed for $100. Hell, you can even have the Y8 head that the aem cam gear is attached to if you give me an extra $10 or something. I want this shit gone, I'm cutting my losses on this, so just come get it.