FS: Holset HE351CW
#1
iTs DA VTACH Yooooo!
Thread Starter
Join Date: Jan 2004
Location: Fredericksburg VA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
FS: Holset HE351CW
I'm selling a Holset HE351CW in great condition. Spins freely, all play is within factory specs. Includes the 45* exhaust elbow and vband so that you can make your own dp more easily. Has the boost control solenoid on the housing. The connector to it has been cut off, but I can include it as well. I have bench tested the solenoid at one of my electronics labs and it responds well within the 30-200Hz range that I tested it at. So if you have an ecu capable of outputting a PWM signal at that freq then you can use it to control your boost.
The turbo also will come with the correct oil feed fitting with a -4an connection on it. as well as a -10an oil return flange. It will literally be ready to bolt up and go as far as the turbo is concerned.
The turbo is in Blacksburg, VA but I am willing to ship within the continental US at the buyers expense. Shipping would run around $35 most likely. You can reach me on AIM at neogenesis2004 or through PM. I'm not accepting any trades at this time.
I would like to get $350 obo for the turbo.
The turbo also will come with the correct oil feed fitting with a -4an connection on it. as well as a -10an oil return flange. It will literally be ready to bolt up and go as far as the turbo is concerned.
The turbo is in Blacksburg, VA but I am willing to ship within the continental US at the buyers expense. Shipping would run around $35 most likely. You can reach me on AIM at neogenesis2004 or through PM. I'm not accepting any trades at this time.
I would like to get $350 obo for the turbo.
Thread
Thread Starter
Forum
Replies
Last Post