VQ35DE-S13 Drift Build part out!!
#1
SAY IT WITCHA CHEST!
Thread Starter
Join Date: Mar 2007
Location: Outer Space
Posts: 3,949
Likes: 0
Received 0 Likes
on
0 Posts
VQ35DE-S13 Drift Build part out!!
Name: Corey
Location: Roanoke, Va
Contact: PM
Parting out my VQ35DE S13 build just in time for you to starting building your car for the 2014 drift season!! After starting my build, I quickly realized my chassis was garbage...so Ive decided to go a whole different direction. Most parts are still new in the box. My chassis is already gone, so please don't ask for random parts. What I have listed is all I currently have.
All prices are picked up in Roanoke, Va, can ship at buyers expense. If paying with Paypal, you will have to pay the PP fees.
VQ35E S13 swap- $3800. 95% complete. All thats needed to be a full swap is the powersteering lines of your choice (KA24E or Chase Bays kit), and weld some small holes in the test pipes from the previous owners car being so low, or just replace them. Comes with motor, trans, freshly rewired swap harness, Uprev flashed ECU (NATS removed), gas pedal, Cluster from the 350z the motor was pulled from, Furookie Intake, 1 piece driveshaft, mounts, and y-pipe. Will also include a set of HR tubular headers (was told they clear the 240sx steering shaft without needing to be dimpled for clearance). Both previous owners of the swap confirmed that it has around 35k miles on it. Intake valves are SPOTLESS, its a super clean swap!
BNIB Megan Inner tie rods w/ S14 moog outers and rack boots- $110
BNIB Contano S13 5-lug conversion hubs- $200
BNIB ASD Hydro w/ reservoir (for dual rear calipers)- $190
Z32 brake upgrade, 30mm alminum fronts. Front and rears have fairly new pads. comes with steel braided 240sx conversion lines- $350
z32 rear calipers w/ pads- $125
BNIB Drilled and slotted z32 front rotors- $100
BNIB Drilled and slotted Cobra rear rotors (for dual caliper setup)- $100
BNIB S13 ISIS tension rods- $80
BNIB Square G33 wheels, 17x9+15 5x114.3 full set- SOLD
BNIB XXR 526 17x10+20 4z114.3 just a pair- SOLD
BNIB 1JZGTE Spec Stage 3 clutch kit- $420
Location: Roanoke, Va
Contact: PM
Parting out my VQ35DE S13 build just in time for you to starting building your car for the 2014 drift season!! After starting my build, I quickly realized my chassis was garbage...so Ive decided to go a whole different direction. Most parts are still new in the box. My chassis is already gone, so please don't ask for random parts. What I have listed is all I currently have.
All prices are picked up in Roanoke, Va, can ship at buyers expense. If paying with Paypal, you will have to pay the PP fees.
VQ35E S13 swap- $3800. 95% complete. All thats needed to be a full swap is the powersteering lines of your choice (KA24E or Chase Bays kit), and weld some small holes in the test pipes from the previous owners car being so low, or just replace them. Comes with motor, trans, freshly rewired swap harness, Uprev flashed ECU (NATS removed), gas pedal, Cluster from the 350z the motor was pulled from, Furookie Intake, 1 piece driveshaft, mounts, and y-pipe. Will also include a set of HR tubular headers (was told they clear the 240sx steering shaft without needing to be dimpled for clearance). Both previous owners of the swap confirmed that it has around 35k miles on it. Intake valves are SPOTLESS, its a super clean swap!
BNIB Megan Inner tie rods w/ S14 moog outers and rack boots- $110
BNIB Contano S13 5-lug conversion hubs- $200
BNIB ASD Hydro w/ reservoir (for dual rear calipers)- $190
Z32 brake upgrade, 30mm alminum fronts. Front and rears have fairly new pads. comes with steel braided 240sx conversion lines- $350
z32 rear calipers w/ pads- $125
BNIB Drilled and slotted z32 front rotors- $100
BNIB Drilled and slotted Cobra rear rotors (for dual caliper setup)- $100
BNIB S13 ISIS tension rods- $80
BNIB Square G33 wheels, 17x9+15 5x114.3 full set- SOLD
BNIB XXR 526 17x10+20 4z114.3 just a pair- SOLD
BNIB 1JZGTE Spec Stage 3 clutch kit- $420
Last edited by The Nisbro; 12-08-2013 at 01:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
gonzoe00
Engine / Exhaust / Drivetrain
11
06-17-2011 01:43 AM
gonzoe00
Part Outs
12
08-21-2010 08:14 AM