500whp DSM Part out
02-11-2011, 07:49 AM
#1
Registered Member
Thread Starter
Join Date: Dec 2009
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
500whp DSM Part out
Name: Kitric Weiss
Location: Newport News
Means of contact: 316-347-3715 Text is usually easier for me
I am going to be parting out my 99 GST
It is my Daily Driver so i'm going to see who wants what for the first few days and then i'm going to begin parting it out.
I was planning on parting out most of the stuff on the car, and then i was going to put it back together, close to stock and re sell it, unless someone wants to shoot me an offer for the motor and car etc...
10,000 miles on the motor and 2k of it was the drive from South Dakota for the move. It was my daily driver and it didnt get run hard that often at all. motor is still in the car if you wanna come check it out. i have receipts and pics too.
Polished Crank
Polished Rods
Topline Pistons
New Rings
New Bearings
Hot tanked and bored .020 over
New Valves
New Valve Guides
New Lifters
New Timing Belt, Pulleys etc
New Spark Plugs (BPR7ES) 1 step colder, gapped at .28
Brian Crower 272/272 Cams
ARP Head Studs
Cometic Head Gasket
Compression is 155 across the board
Healthy and strong motor
-1500
Completely Rebuilt Trans
New Disks
New Syncros etc you know the deal, Shifts Perfect,- 800
Quaife LSD- 1000
If bought together- 1500
18x8.5 MB Weapons- 800 obo with tires, all 4 have 235-35-18r
2 fronts have Bf goodrich G force
2 backs have Kumho ASX. Tread is good on both, fronts are almost brand new.
Hallman MBC- 50
TurboXS MBC- 100
AEM 5 bar MAP Sensor- make offer
AEM IAT sensor- make offer
^^^^ For Speed Density
Precision 880cc Injectors- Will trade for smaller injectors plus cash on your end. but- 250
DSMLink V3- 700
Eprom Ecu- 250
If bought together- 850
Turbonetics 60-1 Ball bearing Turbo (T3/T4). 63 a/r 6k miles (but has Brand New Seals)Custom oil/coolant fittings as well. Excellent Condition- 850
Forced Performance Exhaust Manifold- 250
Custom Made Dump Tube- 50
O2 Housing- 50
Tial 44mm External Wastegate- 200
1200 for the whole turbo set up with whats listed above. Will trade for smaller turbo plus cash on your end.
Extreme Turbo Systems Racing FMIC (Short Route)40% more airflow- 800 Will trade for sidemount set up or other intercooler set up plus cash on your end.
Apexi Short Ram Intake- 80
NGR Type S BOV- 100
Autometer Boost Guage up to 30 psi- probably not for sale
AEM UEGO Wideband- 150
New O2 Sensor- 20
New Alternator- 75
New Starter- 50
3 inch exhaust all the way back, 2.5in high flow cat- 150
Alpine Type S speakers and tweeters all around.
In dash touch screen. Pioneer - 500 obo
I'll finish the rest when i'm off work.
Location: Newport News
Means of contact: 316-347-3715 Text is usually easier for me
I am going to be parting out my 99 GST
It is my Daily Driver so i'm going to see who wants what for the first few days and then i'm going to begin parting it out.
I was planning on parting out most of the stuff on the car, and then i was going to put it back together, close to stock and re sell it, unless someone wants to shoot me an offer for the motor and car etc...
10,000 miles on the motor and 2k of it was the drive from South Dakota for the move. It was my daily driver and it didnt get run hard that often at all. motor is still in the car if you wanna come check it out. i have receipts and pics too.
Polished Crank
Polished Rods
Topline Pistons
New Rings
New Bearings
Hot tanked and bored .020 over
New Valves
New Valve Guides
New Lifters
New Timing Belt, Pulleys etc
New Spark Plugs (BPR7ES) 1 step colder, gapped at .28
Brian Crower 272/272 Cams
ARP Head Studs
Cometic Head Gasket
Compression is 155 across the board
Healthy and strong motor
-1500
Completely Rebuilt Trans
New Disks
New Syncros etc you know the deal, Shifts Perfect,- 800
Quaife LSD- 1000
If bought together- 1500
18x8.5 MB Weapons- 800 obo with tires, all 4 have 235-35-18r
2 fronts have Bf goodrich G force
2 backs have Kumho ASX. Tread is good on both, fronts are almost brand new.
Hallman MBC- 50
TurboXS MBC- 100
AEM 5 bar MAP Sensor- make offer
AEM IAT sensor- make offer
^^^^ For Speed Density
Precision 880cc Injectors- Will trade for smaller injectors plus cash on your end. but- 250
DSMLink V3- 700
Eprom Ecu- 250
If bought together- 850
Turbonetics 60-1 Ball bearing Turbo (T3/T4). 63 a/r 6k miles (but has Brand New Seals)Custom oil/coolant fittings as well. Excellent Condition- 850
Forced Performance Exhaust Manifold- 250
Custom Made Dump Tube- 50
O2 Housing- 50
Tial 44mm External Wastegate- 200
1200 for the whole turbo set up with whats listed above. Will trade for smaller turbo plus cash on your end.
Extreme Turbo Systems Racing FMIC (Short Route)40% more airflow- 800 Will trade for sidemount set up or other intercooler set up plus cash on your end.
Apexi Short Ram Intake- 80
NGR Type S BOV- 100
Autometer Boost Guage up to 30 psi- probably not for sale
AEM UEGO Wideband- 150
New O2 Sensor- 20
New Alternator- 75
New Starter- 50
3 inch exhaust all the way back, 2.5in high flow cat- 150
Alpine Type S speakers and tweeters all around.
In dash touch screen. Pioneer - 500 obo
I'll finish the rest when i'm off work.
Last edited by 99GST; 02-11-2011 at 04:42 PM.
02-11-2011, 08:50 AM
#2
R.I.P B.K.H & K.D.A.
Join Date: Mar 2003
Location: Va Beach
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: 500whp DSM Part out
Good luck with the part out. My list looks similar and I might be doing to the same soon.
02-11-2011, 12:43 PM
#3
Registered Member
Thread Starter
Join Date: Dec 2009
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Re: 500whp DSM Part out
Thanks man i appreciate it.
02-12-2011, 09:12 AM
#4
Registered Member
Thread Starter
Join Date: Dec 2009
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Re: 500whp DSM Part out
bump
02-18-2011, 05:30 AM
#5
Registered Member
Thread Starter
Join Date: Dec 2009
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Re: 500whp DSM Part out
up
02-21-2011, 09:32 AM
#6
Registered member
Join Date: Feb 2007
Location: Smithfield
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Re: 500whp DSM Part out
Will to sell front bumper and passenger side fender skirt cap?
If so pm me a price picked up
If so pm me a price picked up
04-24-2011, 07:49 AM
#7
Registered Member
Join Date: Jul 2007
Location: Cheesy Peesy
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Re: 500whp DSM Part out
Do you still have the wideband for sale?
04-24-2011, 06:53 PM
#8
Registered Member
Join Date: Jan 2009
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Re: 500whp DSM Part out
Not hating but isnt link sold for far cheaper on their website? Like 200 cheaper brand new. Just saying.
Thread
Thread Starter
Forum
Replies
Last Post
