2008 si sedan part out!!!!! Ctr, tsx retro, comptech ect!
#1
2008 si sedan part out!!!!! Ctr, tsx retro, comptech ect!
Name:Bryan
Contact: pm me!
Location: Out skirts of Raleigh!
Ctr rear - Need stock rear from taffeta white sedan including axleback plus $2100 which will include
oem ctr rear bumper with 3 piece diffuser- new was over 800
oem ctr trunk lid, with jdm badge, trunk mldg, and license plate lights- new was over 600 for all!
oem ctr inner and outer taillights - new was around 500 for all
Ctr replica spoiler - was around 300
Everything was sprayed to my likings by a painter where I used to work at true2form
Also included will be a LSD Power 4 Catback that has been modified by Rj to fit the ctr exhaust outlet! This exhaust retails around 600 and spent like 80 on modding it!
Ctr replica bumper - $200
Used this to begin with but burnt it with my exhaust. Decided to be balla and went oem. The diffuser is built into bumper. Will be easy fix for anyone good with plastic repair...pics soon
Fujita sri in bronze...$170
Comptech short shifter $55
comptech springs $130 or $210 with ingalls rear camber plates
konig Runaway rims with toyo proxie 225 45 17's has 35 offset and is 8inches wide! One tire is cupped! Two have half tread left and one is above half! Rims only about 5 months old! $750
Skunk2 knob $25 plus stock knob
Tsx retro fit! - This is done by customlightz in VA! Tsx projectors retrofitted into my oem headlights with mdx shrouds and blacked out housing! Will include phillps d2s bulbs and some luminex 6k highbeams! Need your stock lights plus $450!
OEM allseason floor mats and trunk mat $75
Contact: pm me!
Location: Out skirts of Raleigh!
Ctr rear - Need stock rear from taffeta white sedan including axleback plus $2100 which will include
oem ctr rear bumper with 3 piece diffuser- new was over 800
oem ctr trunk lid, with jdm badge, trunk mldg, and license plate lights- new was over 600 for all!
oem ctr inner and outer taillights - new was around 500 for all
Ctr replica spoiler - was around 300
Everything was sprayed to my likings by a painter where I used to work at true2form
Also included will be a LSD Power 4 Catback that has been modified by Rj to fit the ctr exhaust outlet! This exhaust retails around 600 and spent like 80 on modding it!
Ctr replica bumper - $200
Used this to begin with but burnt it with my exhaust. Decided to be balla and went oem. The diffuser is built into bumper. Will be easy fix for anyone good with plastic repair...pics soon
Fujita sri in bronze...$170
Comptech short shifter $55
comptech springs $130 or $210 with ingalls rear camber plates
konig Runaway rims with toyo proxie 225 45 17's has 35 offset and is 8inches wide! One tire is cupped! Two have half tread left and one is above half! Rims only about 5 months old! $750
Skunk2 knob $25 plus stock knob
Tsx retro fit! - This is done by customlightz in VA! Tsx projectors retrofitted into my oem headlights with mdx shrouds and blacked out housing! Will include phillps d2s bulbs and some luminex 6k highbeams! Need your stock lights plus $450!
OEM allseason floor mats and trunk mat $75
#3
Re: 2008 si sedan part out!!!!! Ctr, tsx retro, comptech ect!
Noooooooooo! I remember seeing this when I was at the NSI meet
Can vouch for total cleanliness
Good luck man
Can vouch for total cleanliness
Good luck man
#4
Re: 2008 si sedan part out!!!!! Ctr, tsx retro, comptech ect!
Thanks man! Just time to grow up some and I need a Truck! I still have the boosted da in the garage
#5
Re: 2008 si sedan part out!!!!! Ctr, tsx retro, comptech ect!
Well hopefully you will find what you need and get what you want out of this! Good luck.
#6
NAZI mod
Join Date: Oct 2008
Location: Virginia Beach
Posts: 1,218,276
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2008 si sedan part out!!!!! Ctr, tsx retro, comptech ect!
I love those tails....
awesome looking car.
awesome looking car.
Thread
Thread Starter
Forum
Replies
Last Post
watisjdm
Import - ASIA
12
12-20-2009 05:49 AM
tecnic1
Parts ARCHIVE
77
12-11-2007 01:42 PM