2 broken XBOX 360 CONSOLEs only
06-11-2010, 08:43 AM
#1
Troll & Run
Thread Starter
Join Date: Sep 2007
Location: Hampton Roads
Posts: 22,993
Likes: 0
Received 0 Likes
on
0 Posts
2 broken XBOX 360 CONSOLEs only
Shawn
PM me
Suffolk
Asking 80 for both or trade for an HDMI 360 that is working or other trades
I have two 360s that don't work. One is rattle canned flat black with a talismoon green fan and IIRC the red ring code is 0020 and has been reflowed before, the other one is the stock white color and has had the lens replaced on it previously but now keeps freezing up constantly with no red rings or anything. I can post pics but they look like xbox 360s
white one has a couple scuffs on it. Neither are HDMI.
PM me
Suffolk
Asking 80 for both or trade for an HDMI 360 that is working or other trades
I have two 360s that don't work. One is rattle canned flat black with a talismoon green fan and IIRC the red ring code is 0020 and has been reflowed before, the other one is the stock white color and has had the lens replaced on it previously but now keeps freezing up constantly with no red rings or anything. I can post pics but they look like xbox 360s
white one has a couple scuffs on it. Neither are HDMI.
Last edited by ShawnD; 06-15-2010 at 06:15 AM.
06-14-2010, 09:20 AM
#4
Troll & Run
Thread Starter
Join Date: Sep 2007
Location: Hampton Roads
Posts: 22,993
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2 broken XBOX 360 CONSOLEs only
White one finally ringed for me, error is:
0102 unknown error
though it's most likely GPU related literally means the console does not know what is wrong. possibly a short or cold solder joint somewhere. So far there is 1 major theory for what causes most of these errors is that the Ram, CPU, or GPU are not soldered properly to the mother board due either to poor manufacturing or excessive heat up and cool down cycles that stress, weaken and eventually break the soldered connection.
There are two theories to fixing this one deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call MS to have it replaced. I have also heard of limited success by simply switching the AV cable from "HDTV" mode to "TV" mode.
0103 CPU Error/ CPU Overheating - see solution for error 0102
0102 unknown error
though it's most likely GPU related literally means the console does not know what is wrong. possibly a short or cold solder joint somewhere. So far there is 1 major theory for what causes most of these errors is that the Ram, CPU, or GPU are not soldered properly to the mother board due either to poor manufacturing or excessive heat up and cool down cycles that stress, weaken and eventually break the soldered connection.
There are two theories to fixing this one deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call MS to have it replaced. I have also heard of limited success by simply switching the AV cable from "HDTV" mode to "TV" mode.
0103 CPU Error/ CPU Overheating - see solution for error 0102
Thread
Thread Starter
Forum
Replies
Last Post