LOOKIN 4 A GOOD MACHINE SHOP
 

~~~~>PLEASE PEOPLE. I AM ONLY LOOKING FOR THE BEST MACHINE SHOP IN TOWN<~~~~~~~~~~~~~~~~

I AM LOOKING FOR A GOOD MACHAINE SHOP THAT KNOWS HOW TO DO THE JOB RIGHT AND RIGHT THE FIRST TIME. IF YOU KNOW OF A SHOP THAT FITS MY DISCRIPTION HERE BY NORFOLK OR VIRGINIA BEACH PLEASE RESPOND.

I WILL NOT TAKE NO RECMENDATION FOR PERFPRMANCE UNLIMITED ON 7520 AVE J NORFOLK, VA. 23513. BEAWRE OF THIS SO CALLED MACHINE SHOP. JEFF THE OWNER SCREWED ME OUT OF 1400.00 IN MACHINE WORK BECAUSE OF THE CRAPY WORK BUCK HIS SO CALLED MACHINES DID. BUCK NEVER HONED MY LIFTER BORES ON MY BLOCK. WHEN I ASKED BUCK HOW MUCH WAS SHAVEN OFF OF MY HEADS AND THE BLOCK HE COULD ONLY RESPONDED BACK "NOT MUCH OR VERY LITTLE". HE DOES NOT KNOW FOR SURE HOW MUCH HE SHAVED OFF MY HEADS OR BLOCK. NO THAT RIGHT THERE BEING SAID IS NOT TOO BAD I GUESS RIGHT. WELL WHEN BUCK WAS IN THE PORCESS OF INSTALLING MY PISTONS FOR THE SHORT BLOCK HE THEN NOTICE A CRAKE IN ONE OF MY CYLINDERS. NOW IF IM NOT MISTAKING WHEN THE BLOCK IS BEING HOT TANKED AND CHEACKED FOR CRAKES THATS WHEN YOU ARE SURPOSED TO FIND A CRAKE NOT AFTER ALL THE MACHINE WORK IS DONE AND YOU ARE PUTTING THE PISTION IN. WELL BUCK SLEVED THAT CYLINDER COASTING ME 50.-75. MORE FOR ONE OFF HIS FUCK UPS. OK BUT TO SET THIS HOLE THING OFF MY LIFTER BORES WHERE NEVER HONED. I DID NOT FIND THIS OUT UNTILL I GOT THE BLOCK HOME AND FINISHED SEALING UP THE BOTTOM OF THE ENGINE. WELL I PRE SOAKED MY LIFTERS IN OIL AND WHEN I WENT TO PUT THEM IN THE BORE THEY WHERE EXTREMLY TIGHT OR WOULD NOT GO IN ALL THE WAY WITH OUT PLAYING WITH THEM. I CALLED BUCK AND HE TOLD ME TO PLAY WITH THEM TO GET THEM TO GO IN OR TO TAKE A FINE SAND PAPER A CHACE THE BORES. NOW TO THE POINT I WIPED OUT 5 LIFTER AND MY CAM. MY FAULT JEFF SAID DO TO INPROPER FIREING ORDER. THE FIRING ORDER WAS RIGHT AND WAS RIGHT FROM THE VERY FIRST POINT. I STILL HAVE TO LIFTER BORES THAT YOU CAN NOT DROP A LIFTER IN FREELY OR WITH OUT GETTING HUNG.
I AM NOT LOOKING FOR ANOTHER JEFF AND BUCK TO BEND ME OVER AND STICK IT IN ME.

Re: LOOKIN 4 A GOOD MACHINE SHOP
 

abacus

Re: LOOKIN 4 A GOOD MACHINE SHOP
 

for the love of GOD. stfu.

Re: LOOKIN 4 A GOOD MACHINE SHOP
 

virginia speed does good work!!..as what i hear from

Re: LOOKIN 4 A GOOD MACHINE SHOP
 

where is virginia speed shop located. do you know there number thnax

Re: LOOKIN 4 A GOOD MACHINE SHOP
 

i dont know the number but there off london bridge....i forgot the name of the street but its the 2nd light from damn neck rd..and its back in there..you can see it from london bridge

Re: LOOKIN 4 A GOOD MACHINE SHOP
 

I also had some machine work done there. (Performance Unlimited)

Similiar situation. Those douche bags are out to fuck you in my opinion.

Don't go in there and even act like you don't know shit about engines because they will lie right to your face.

My heads are STILL jacked up.

I was told things that I know for a fact were wrong. Peckerheads !!

They have a hard time getting it right with a domestic engine and I would be damned if I would trust them with my 1.3L DOHC Suzuki.

Re: LOOKIN 4 A GOOD MACHINE SHOP
 

HEY ASSHOLE ... you seemed to of had your caps lock/bold tag in the wrong place.

Im not even going to attempt to read your rambling on Performance, dont care ... but if you make another thread

DONT REPEAT THE SAME WAY YOU DID THIS TIME FUCKOO

Re: LOOKIN 4 A GOOD MACHINE SHOP
 

hey broken Neck , you need to check in with Chad at Apples machine shop on RT 17 in York county . This guys does great work at a great price , he does alot of work for me . Just tel him you know Kenny Rogers


Hope that help s

Re: LOOKIN 4 A GOOD MACHINE SHOP
 

... why ... i dont need machine work done, and when I do ... L&M in Norfolk :D